New Type Stone Crushing Machine/impact crusher/ Mobile Crusher Made in China

Specifications

1, High crushing ratio, uniform particle size.
2, Safe and reliable lubrication system, easy to replace parts, low maintenance

Jaw crusher

  

Introduction

 

     Hammer crusher is suitable for crushing hard material (compression strength less than 250Mpa). It can be used for medium anf fine crushing. For example: coarse and fine crushing operation of iron ore, slag, phosphorus ore, copper ore, silicon ore, limestone, quartz stone, ceramic and solid materials with similar  hardness; breaking bulk materials of concentrator, stones factory, cement plant. Be widely used in mining, building stones factory, building materials, metallurgy, ceramics and other industries.

   According to differnent models of the hammer crusher, the feeding particle size varies from 400-700mm and the discharged particle size 10-100mm or 12-100mm, 12-150mm and so on. It can be also adjusted to your requirements.   

Features:   

1,Overcome the other hammer crusher hammer wear quickly, easily broken hammer pin defects into the material with a particle size large.

 2,  The materials could be crushed over and over again in the crushing cavity until it meets the requirements then it can be discharged from the outlet.

 3, low use and maintenance costs,high ratio of reduction, high reliability, small power consumption.

 

 

Advantages: 

1, The bearings adopt complete steel structure.

2, It is more convenient to adjust the discharging mouth.

3, Simple structure; easy to maintence.

Working principle

   The motor drives the belt wheel to rotate at a high speed through the belt, and on the rotor there are a series of hammers. When the materials get into the cavity of hammers, under the high rotation speed of the hammers, the products which are crushed to meet the required size can be discharged by the outlet and become the final products. The large size products which cannot meet the requirements will be brought back again to be crushed until they meer the requirements.

    According to differnent models of the hammer crusher, the feeding particle size varies from 400-700mm and the discharged particle size 10-100mm or 12-100mm, 12-150mm and so on. It can be also adjusted to your requirements.

   Another kind of hammer crusher is equipped with ring hammer, which is called ring hammer crusher and oculd be found in our companies products catalogue.

  

Technical parameter 

 

Detailed Product Pictures

Production Workshop

International Commercial Coopreation

 

 

 Packaging&Shipping

Small parts in wooden case, machine body bare in loose.Shipping term: Stardand container, bulk cargo carrier by sea or overland transportation. Ocean freight  and Train shipping is available. 

  We are the profrssional manufacturer with independent research and development capacity. We have faith in providing full service! We are OEM so that the price is much lower than the market price and the products could be customized!

                                    Always at your service!                                                     

Contact us!  More details, feel free to contact us! We are aimed to provide best service!

 

1. What kind of the raw materials(such as Quartzite ) and its size(mm/inch)?

2. What's the discharging size?

3. What's the required Capacity(tons per hour or TPH)?

4. Other special requirements.

Address:Dongcheng Development Zone,Linqu Weifang,Shandong,PR China

Telephone:0086-536-2082685.