288T High Quality CE Approved Bakelite Fitting Energy Saving Injection Molding Machine

Specifications

1.CE approved
2.Special for Bakelite products
3.High precision achieved
4.Automatic mould adjugement
5.MOQ1 set

  

PARAMETER OF BJ288V2-T
DESCRIPTION	UNIT	BJ288V2-T
CLAMPING UNIT
Clamping force	KN	2800
Opening stroke	mm	550
Max.daylight	mm	1130
Platen size	mm×mm	850×850
Space between Bars(H*V)	mm×mm	610×610
Max. Mold Height	mm	580
Min. Mold Height	mm	250
Ejector Stoke	mm	145
Ejector Force	KN	77
INJECTION UNIT
Screw Diameter	mm	60 68
Screw L/D Ratio		16 15
Injection Pressure	Mpa	169 132
Shot Volume	cm³	792 1017
Shot Weight(PS)	g	950 1220
Injection rate	g/s	302 387
Screw Stroke	mm	280
Screw Speed	RPM	165
POWER UNIT
Hydraulic system pressure	MPa	17.5
Pump motor power	KW	22
Heater power	KW	14.2
GENERAL
Oil tank capacity	L	420
Machine weight	Ton	8.2
Machine dimensions(l×w×h)	m×m×m	6.2×1.5×2.2

 

Advantages:

• Fast response proportional variable pump matches the hydraulic output and the need of running of the machine, without lost of high pressure over flow, which can save 25-50% power comparing with the fixed pump machine.
• Special design screw and barrel for Bakelite, which is made by high strength bi-metallic steel with special treatment, with the characteristic of good corrosion resistance and good abrasion resistance.
• Oil cooling device in the screw and barrel insures the precision of the temp. control.
• Mould open and exhaust.
• Change of screw and barrel can be used as standard injection mold machine.
• Upgraded size of the injection motor with increase of injection pressure achieves better plasticization.
• Special design heat resolution plate of adopted in the mould platens.
• 2 sets of interface port for the mould temp. control is provided with computer control
• High precision 0.1mm can be achieved with the electric sensor control
• Automatic mould adjustment is control by computer by entering the clamping force directly.