Electric Products Chip Welding BGA Rework Station

Specifications

Electric Products Chip Welding BGA Rework Station
2.CCD camera and optical alignment
3.semi-automatic IR HD touch screen

Hot Sale Electric Products Chip Welding BGA Rework Station

 

 

Total Power	6800W
Top heater	1200W
Bottom heater	Second heater 1200W, IR preheating 4200W
power	AC220V±10%     50/60Hz
Dimensions	L670×W750×H950 mm
Positioning	V-groove, PCB support can be adjusted in any direction with external universal fixture
Temperature control	K Sensor, Closed loop
Temp accuracy	±2℃
PCB size	Max 430×460 mm Min 22×22 mm
Workbench fine-tuning	Forward/back±15mm, rigth/left±15mm
Camera magnification	10x-100x times
BGA chip	2X2-80X80mm
Minimum chip spacing	0.15mm
External Temperature Sensor	5(optional)
Placement Accuracy	±0.01mm
Net weight	91kg

 

 

Description of Electric Products Chip Welding BGA Rework Station

 

1.Embedded Industrial PC, high definition touch screen interface, PLC control, and instant profile analysis function. Real-time settings and actual temperature profile display can be used to analyzed and correct parameters if necessary.

 

2. Three temperature areas can independently heat and are multiple controllable and adjustable to ensure best integration of different temperature areas. Heating temperature, time, angle, cooling and vacuuming can all be set on the interface.

 

3.It uses precise K-type close circuit control and automatic temperature adjustment system, with PLC and temperature module to enable precision temperature control of ±2 degC. External temperature sensor enables temperature monitoring and accurate analysis of real time temperature profile.

 

4.V-groove PCB support for rapid, convenience and accurate positioning that fits for all kinds of PCB board.

 

5.Flexible and convenient removable fixture on the PCB board which protectsand prevent damage to PCB. It can also adapt to rework various BGA packages.

 

6.Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement

 

7.High precision digital video registration system, rocker to make the optical lenses move in forword/back and right/left. Observe the counterpoint of four corners of BGA and central point

 

8.X,Y direction and R angle adopt micrometer fine-tuning. Registration accuracy can reach ±0.01MM. Equipped with high-definition liquid crystal display.

 

9.There are 6-8 levels of variable and constant temperature controls. Massive storage of temperature curves which are Instant accessible according to different BGA. Curve analysis, setting and adjustment are all accessible via touch screen.

 

10.Including Voice "early warning" function. 5-10 seconds before the completion of uninstalling or welding, voice reminder / warning to get the workers prepared. Cooling system will start after vertical wind stopped heating. When the temperature drops to room temperature, the cooling process will stop, so that the machine will not age after heated up.

 

11.Built-in vacuum pump

 

12.CE certification, with emergency switch and automatic power-off protection device when emergency happens

 

Structure of Electric Products Chip Welding BGA Rework Station

Function of Electric Products Chip Welding BGA Rework Station

 

NO	Name	Usage	How to use
1	Angel adjustment	Adjust BGA angel	Rotate button
2	Top heating head	Automatic heating equipment	Manual or automatic through HD touch screen
3	Laser positioning	Indicate the BGA position	Press the laser button
4	Top hot air nozzle	Control the hot air more evenly
5	LED head light	Lighting when working	Press the LED button
6	Bottom hot air nozzle	Control the hot air more evenly
7	IR plate	Preheat the PCB board
8	IR plate switch	Switch of the IR plate	Press the button
9	X-axis microadjustment	Adjust the PCB board X-axis direction	Rotate the micrometer
10	Y--axis microadjustment	Adjust the PCB board Y-axis direction	Rotate the micrometer
11	Emergency stop	Stop the machine immediately	Press the button
12	Laser button	Control the laser position	Press the button
13	Start button	Start heating	Press the button
14	LED button	Control the LED head light	Press the button
15	LCD display	Display the BGA picture	Connect the power line
16	Place system	Placing the BGA chips	Manual or automatic through HD touch screen
17	PCB support	Support the PCB boards
18	Cross flow fan	Cooling the PCB board after heating
19	Lock screw	Lock the PCB support	Rotate the screw
20	USB interface	Transfer files	USB connector
21	Temperature sensor	Test the outer temperature	Connect the sensor
22	Alignment brightness adjustment	Adjust the alignment brightness	Rotate the screw
23	HD touch screen	Operate the program

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

More photo of Electric Products Chip Welding BGA Rework Station

Packing List

1. DH-A4 BGA rework station (touch screen) 1 set

2. Display 1 set

3. Vacuum sucker Pad 3 piece 

4. Vacuum nozzle 1 set

5.DH-A4 specification(manual) 1 copy

6.Hot air nozzle   5 piece  ( 31*31/38*38/41*41/34*34/55*55 ) 

7.Abnormity clip 6 piece

8. Blossom knob 6 piece

9. Supporting Screw 6 piece

10.External Temperature sensor 1 piec 

BGA Rework Station Accessories

 

Packing

 

Company

 

 

Customer

 

 

 

 

Certification

 

 

 

Contact Us

Name:Cher

Mobile:008613725586194

Office:0086 75529091833

Skype:vic8939 

E-mail:sales23 @