Hot sale PE-500x750 stone jaw crusher for ores

Specifications

1 Less noise and dust.
2 High crushing ratio,uniform particle size.
3 Simple structure, safe work,low cost.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Application of Jaw Crusher

 

Jaw crusher series are used for the primary and secondary crushing of hard material. There are two types of crusher, including coarse jaw crusher and fine jaw crusher.

Advantages of Jaw Crusher  .

1 Less noise and dust.

2 High crushing ratio,uniform particle size.

3 Simple structure, safe work, low operating cost.

4 Deep crushing chamber with no dead zone , improves the feeding size which leads to a high capacity. 

5 Equipment energy-saving: save 15%-30% energy,save system energy more than twice.

6 Gasket discharge gate adjusting device makes it more convenient to use. Wide adjustable range improves 

   the flexibility of the equipment.

Jaw Crusher Working Principle

The working part of the jaw crusher is two pieces of jaw plate, one is stationary and fixed on the front wall of machine body, which is called fixed jaw, while the other cne, swing jaw, making a crushing chamber with the fixed jaw, move back and forth periodically. When separating, the material enters into the crushing chamber and then the particle drops out from the bottom; when combined, the material is crushed by the compressive force, buckling and split effect from the jaw plate.

Pictures of the impact crusher working principle for reference

  

 

Model and Technical Data

Model	Input size  (long*width) (mm)	Output size (mm)	Biggest feeding  granularity (mm)	Production (T/h)	Eccentric shaft  speed (r/min)	Motor power (KW)	Size (long*width*high) (mm)
ZG-PE-250*400	250*400	20-60	200	8-16	300	15	1430*1316*1296
ZG-PE-400*600	400*600	40-100	350	14-36	275	30	1700*1732*1656
ZG-PE-500*750	500*750	50-120	400	30-80	250	55	1900*1876*1821
ZG-PE-600*900	600*900	75-200	480	56-192	250	55	2280*2245*2320
ZG-PE-800*1100	700*1100	80-200	600	70-195	250	75	2550*2280*2380
ZG-PE-750*1060	750*1060	80-235	630	105-195	250	90	2655*2302*3110
ZG-PE-900*1200	900*1200	95-265	750	90-220	220	110	3800*3160*3050
ZG-PE-1100*1400	1100*1400	150-300	1000	150-340	180	160	4200*3020*3900
ZG-PE-1200*1500	1200*1500	150-300	1100	200-500	180	200	4100*3120*4155
ZG-PE-500*1500	500*1500	50-120	400	60-160	300	90	2250*2680*1920

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Producing Department 

 

 

 

 

 

 Our Factory

 

Based on the 26 years experience of the foundry and casting

 

 manufacture, we can supply the high quality products, good 

 

price and best services! 

 

We also can design and produce the products according to the

 

 clients special need!

 

Welcome to China, welcome visit our factory!!!

 

If you have any need about the products, please feel free to

 

 contact with me!

 

Elena Jin

 

Skype: jxyelena