Home > Products > SH5700 Building materials burning tester > Surface materials entities room test device
Surface materials entities room test device
- 5 Set / Sets per Month
Product Details
Place of Origin: | Guangdong, China | Brand Name: | Sunho | Model Number: | SH5721 |
Power: | Electronic | Usage: | Plastic Testing Machine |
Product Description
Surface materials entities room test device is designed relevant standard requirements of appendix A, B and C in DIN5510-2, the standard apply to test the burning performance of train materials and parts materials (Mainly use to test the vehicle seat and backrest in the car). The test device is consists of standard test partition board, standard ignition source, cone-shaped collector, exhaust pipe, flue gas coolers, fans and smoke density measuring device and so on.
1. Standard test partition board:
The Standard test partition board is composed by two mutually perpendicular fireproof boards.
The size of the partition board is 1200 ± 50mm × width 1200 ± 50mm ×height 2000 ± 50mm.
2. Test partition board is composed by non-combustible material which the density is 500~800kg/m3.
3. Standard ignition sources based on the standard requirements of paper pad method in DIN54341 and the relevant provisions of the material parameters.
4. Before the front top of room, there is a cone-shaped collector to connect to the sampling pipe. The top size is: 900*900*900mm, and the bottom size is: 3000*3000mm, the height is 1000mm, flue gas mixing devices are: two steel plates which the size is 2500 × 900mm.
5. The diameter of the exhaust pipe is 400mm, the straight pipe parts is not less than 4800mm.
6. Flue gas cooling using the water smoke to cooling, the outlet temperature of the flue gas should not exceed 80 °C when through the flue gas cooler.
7. Flue gas sampling pretreatment system, with sampling pump, flow meters, filters, condensers and sampling head and so on.
8. The gas exhaust volume of the fan ≥ 2 000m3 / h, the vacuum of the tail fan is 2kPa.
9. The test sample surface temperature measurement system: surface temperature measurement system.
10. Set the integrated sampling area in the smoke exhaust pipe to place the sensors and sampling tubes.
11. Smoke density measurement system, it is designed according to the relevant standard requirements in ISO5659-2, matching with three specifications of standard filters (For daily calibration).
12. Voltage test systems. With differential pressure transmitter.
13. With imported digital wind speed sensors and the wind speed bi-directional sampling probe.
14. Data logging acquisition collecting system, including acquisition card, computer systems (including computers and 17-inch liquid crystal display) and laser printers.
15. Smoke density, temperature and time test data collecting system (Including smoke density test photoelectricity system and temperature sensor), each kinds of test data through the sensor to transmit to the host computer, through the host computer software to calculate and processing, to generate the corresponding graph or table.
Contact Us
- Guangzhou Sunho Testing Equipment Co., Ltd.
- Contact nameYong Ji
- Phone86-20-84282978
- Address#328chigang west road. haizhu guangzhou Guangzhou,Guangdong
- Pencil Hardness Tester HT-6510P
- ASTM D4060 TABER Abrasion Tester Textile Abrasion Test Equipment TABER Test Machine
- 90 Degree Peel Adhesion Testing Machine Adhesive Tape Peeling Tester Peel Strength Test Equipment
- Hardware Corrosion Resistance Test Chamber Salt Spray Test Machine Environmental Testing Equipment
- Most Popular Package Air Leak Test Machine Bottle Seal Tester Food Packaging Seal Testing Machine
- ASTM D5264 Ink Decolorization Test Machine Label Ink Rub Tester Paper Abrasion Resistance Testing Equipment
- Programmable Environmental Testing Machine Climatic Aging Test Chamber Temperature Humidity Test Machine
- Stainless Steel Constant Temperature And Humidity Test Chamber Climate Test Machine Environmental Testing Box
- Good Supplier Index Meter Rubber Melt Flow Rate Test Machine Index Tester Index Test Instrument
- Used Temperature And Humidity Test Chamber High And Low Temperature Test Chamber Climate Aging Testing Machine
- JINGYAN Low Temperature Test Chamber Constant Temperature And Humidity Machine Environmental Aging Test Chamber
- Table Type UV Weather Resistance Testing Machine UV Test Chamber Climate Aging Resistance Test Equipment
- Programmable Temperature And Humidity Testing Machine Climatic Aging Test Chamber Environmental Chamber
- Wholesale Temperature And Humidity Testing Chamber Climatic Test Chamber Environmental Test Equipment
- ASTM D4060 TABER Abrasion Tester Textile Abrasion Test Equipment TABER Wear Testing Machine
- Rotary Taber Abrasion Tester Taber Abrasion Resistance Test Machine Leather Wear Resistance Testing Equipment
- Most Popular UV Accelerated Aging Testing Machine Plastic Aging Test Equipment Climate Test Chamber
- Programmable UV Accelerated Aging Test Machine UVA Weathering Tester Rubber Aging Testing Equipment
- Programmable QVA Aging Test Machine Plastic Weathering Aging Tester Climatic Test Chamber
- JINGYAN Testing Instrument Simulated UV Weathering Tester UV Aging Test Chamber Environmental Test Chamber
- Air Permeability Tester
- Transportation Seismic Tester Simulated Transportation Shaker Table Mobile Phone Vibration Tester Mechanical Vibration Tester
- Random Vibration Tester Packaging Vibration Test Machine Simulate Transportation Vibration Testing Machine
- Professional Simulation Transport Shaking Tester Carton Vibration Table Automobile Vibration Testing Machine
Popular Searches
Recommended Products
- Pencil Hardness Tester HT-6510P
- ASTM D721 Petroleum Waxes Oil Content Tester
- ASTM D1264 Lubricating Grease Water Washout Characteristics Tester
- ASTM D3427 Air Release Properties of Petroleum Products Tester
- ASTM D892 Auto Foaming Characteristics of Lubricating Oils Tester (Air bath)
- ASTM D943 Oxidation Characteristics of Inhibited Mineral Oils Tester
- DIN 51805 Lubricating Grease Flow Pressure Tester
- ASTM D5452 Particulate Contaminant in Aviation Fuel Tester
- PEMS (Portable Emissions Measurement System) Gasboard-9805
- Automobile Emission Gas Analyzer Gasboard-5020
- SF6 Gas density relay Magnetically assisted electrical contact pointer relay SF6
- Intelligent pressure transmitter 2088 electronic digital display high temperature resistant pressure transmitter High-precision hammer-type pressure sensor
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Yong Ji
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-