Vortex Flow Meter measure steam, gas & water

Specifications

Diameter:15-300mm
Connection:Flange/Wafer
Test medium:Gas /liquid /vapor
Explosion proof level:EXdIIBT6

Diameter:15-300mm

Accuracy:

     Liquid: ±1.0% of reading

     Gas: ±1.0% of reading

     Vapor Steam:   ±1.5% of reading

 

Materials:

     Housing: Standard - 304 Stainless Steel

     Shedder Bar:   1Cr18Ni9Ti

     Converter housing and case cover: Aluminum Alloy

 

Output Signal: (Where applicable)

     Sensor:   Pulse signal (Low Level: ≤1V; High Level: ≥6V)

     Transmitter: 4 to 20 mA DC current signal

Signal Transmission Distance:≤500 m

Electrical Connections: ISO M20×1.5 Female

Explosion Proof Level:

     Standard:   ExdIIBT6

Protection Level:   IP65

Vibration:   ≤1.0 g    

Ambient:

     Temperature: -10°C to +55°C

     Pressure: 86 to 106 KPa

     Relative Humidity: 5% to 90%

Power Supply:

     Sensor:   +12V DC (Optional: +24V DC)

     Transmitter:   +24V DC

     Field Display Type: Integral 3.2V Lithium Battery or +24V DC

Fluid Temperature and Pressure: 

     Temperature: Standard: -20°C to +70°C

                 Optional: -20°C to +250°C; -20°C to +350°C

Pressure: Fluid pressure should be limited according to flange rating.

 Model

Vortex Flow Sensor/Transmitter

 

LUGB-N Type Sensor: 12 to 24V DC Power Supply; Pulse Output

LUGB-A Type Transmitter: 24V DC Power Supply; 2-wire 4 to 20 mA Output

Basic Type (Without Explosion Proof) and Explosion Proof Type are optional for LUGB-N and LUGB-A.

LUGB-B Type: powered with 3.2V10AH lithium battery (Battery life = 4 years); no output

LUGB-C Type: 24V DC Power Supply; 2-wire 4 to 20 mA Output (Optional: RS485)