PE150*250 welding crusher

Specifications

welding crusher
A, High ratio of crushing,
B homogeneous final grain size,
C,simple structure,
D,reliable working

welding crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway, and chemical industry. 
welding crusher,Jaw Crusher Working Principle :
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher. 
welding crusher ,Jaw CrusherCharacteristics :
High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost. 
welding crusher Jaw Crusher technical Data of :

Model	feed inlet Dimension ( mm )	Max. Feeding Size (mm)	Capacity (t/h)	Discharge Size (mm)	Motor Power (kW)	Overall Dimensions (mm)	Weight (t)
PE-150×250	150×250	125	1-5	10-40	5.5	875×758×850	0.81
PE-150×750	150×750	125	5-16	10-40	15	1200×1530×1060	3.8
PE-250×400	250×400	210	5-20	20-60	15	1450×1315×1296	2.8
PE-400×600	400×600	340	16-65	40-100	30	1565×1732×1586	6.5
PE-500×750	500×750	425	45-100	50-100	55	1890×1918×1870	10.1
PE-600×900	600×900	500	50-120	65-160	55-75	2305×1840×2298	15.5
PE-750×1060	750×1060	630	52-180	80-140	110	2450×2472×2840	28
PE-900×1200	900×1200	750	140-260	95-165	110	3335×3182×3025	50
PE-1000×1200	1000×1200	850	315-342	195-265	110	3435×3182×3025	57
PE-1200×1500	1200×1500	1020	400-800	150-300	160	4200×3732×3843	100.9
PE-250×750	250×750	210	15-30	25-60	22	1667×1545×1020	4.9
PE-250×1000	250×1000	210	16-52	25-60	30-37	1530×1992×1380	6.5
PE-250×1200	250×1200	210	20-60	25-60	37	1900×2192×1430	7.7
PE-300×1300	300×1300	250	20-90	25-105	75	2720×1950×1600	11