16mm2 25mm2 35mm2 50mm2 70mm2 95mm2 Welding Cable

Specifications

16mm2 25mm2 35mm2 50mm2 70mm2 95mm2 Welding Cable
Rubber insulated or silicone insulated
Rubber insulated copper wire
ISO

16mm2 25mm2 35mm2 50mm2 70mm2 95mm2 Welding Cable

 

 

Application of welding cable

  

Welding Cables are flame retardant, oil resistant, resilient, resists compression cuts and abrasion,

durable, and survives rough handling. Designed for use as arc welding leads from the secondary side of the power

source, typical of welders and welding generators. Not for primary voltage.

 

Construction of welding cable

 

Welding Cables are manufactured using annealed rope-stranded bare copper conductor as per ICEA

S-75-381. A paper tape separates the conductor insulation. A medium-duty EPR jacket is extruded onto the

cable. EP or Hypalon jackets are available. 600 volt spark tested.

 

Standard of welding cable

 

ASTM B-3 ASTM B1732, ICEA S-175-381, IEC 254-1.

       

Specification of welding cable

  

Medium Duty jacket made accordance with ICEA S-75-381 - Portable and Power Feeder Cables for Use in

Mines and Similar Locations or IEC 245-1

600 Volt Spark tested

 

Technical data of welding cable

 

 

Conductor Nominal Section (mm2)	Conductive Core	Thickness of Section Sheath (mm)	Average Outer Diameter (mm2)		200C Conductor Resistance≤(Ω/km)
	Number/Diameter of Core(mm)		Min	Max
10	322/0.20	1.8	7.5	9.7	1.91
16	513/0.20	2.0	9.2	11.5	1.16
25	798/0.20	2.0	10.5	13.0	0.758
35	1121/0.20	2.0	11.5	14.5	0.536
50	1596/0.20	2.2	13.5	17.0	0.379
70	2214/0.20	2.4	15.0	19.5	0.268
95	2997/0.20	2.6	17.0	22.0	0.198
120	1702/0.30	2.8	19.0	24.0	0.161
150	2135/0.30	3.0	21.0	27.0	0.129
185	1443/0.40	3.2	22.0	29.0	0.106