IEC 60502-1 0.6/1kV IEC 60502-1 XLPE insulated，PVC sheathed power cable

TECHNICAL DATA:                                                                        

Type: Cu/XLPE/PVC, AL/XLPE/PVC

Specification: IEC 60502-1,GB/T 12706.1

Rated voltage: 0.6/1kV

Number of Cores: single-core,two-core,three-core,four-core,five-core,three-and-a-half core,three-and-two-half core,four-and-a-half core.  

Operating Temperature: 90℃                                                             

Short-circuit Temperature: 250℃

CABLE STRUCTURE:

Conductors:  Either of Class 1 or Class 2 of copper or aluminium conductor with IEC 60228.

Insulation:  PVC/ST2 accordance with IEC 60502-1.

APPLICATION:

This product is used as AC power distribution and transmission line at rated voltage up to and including 0.6/1kV which can be fixed installed.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

BWhen requested by customers，the cable can also use circular compacted conductors.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

BWhen requested by customers，the cable can also use circular compacted conductors.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

BWhen requested by customers，the cable can also use circular compacted conductors.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

BWhen requested by customers，the cable can also use circular compacted conductors.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

BWhen requested by customers，the phase line of cable can also use circular compacted conductors.

CIt is a neutral wire of the cable which adopts a circular compacted conductor.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

BWhen requested by customers，the phase line of cable can also use circular compacted conductors.

CAmong the two wires, one is the neutral wire and the other is the neutral wire of the cable, and they all adopt the structure of circular compacted conductors.

AThe number of wires in the conductor can be selected from these listed above. It shall be applied to comply with the requirements of IEC 60228.

BWhen requested by customers，the phase line of cable can also use circular compacted conductors.

CIt is a zero wire of the cable which adopts a circular compacted conductor.