refrigerating industrial air cooler

Specifications

refrigerating industrial air cooler
Industrial Air Cooler
designed for preserveration,refrigeration and cold storage
can

refrigerating industrial air cooler

 

 

D-series Air-cooler is one kind of storage cooling equipment used in freon refrigerating, according to applicable temperature, there are 3 series including DL, DD and DJ,which can be used at different storage temperatures.

 

• DL type air-cooler is mainly applicable to about 0°C fresh-preserved storages;
• DD type air-cooler is mainly applicable about -18°C cold storages;
• DJ type cooling fan is mainly applicable to quick-freezing storages below -25°C.  

 

 

1. The housing is in plastic-sprayed coat or rolled, iron plate or aluminum paned, best in corrosion protection, beautiful in shape.

2. Original coil arrangement to reduce the side resistance. The aluminum fins are fastened to the steel tubes by hydraulic expanding way, which is effective to reduce thermal contact resistance and improve thermal transfer.

3. After pressure test, wash with trichloroethylene to clean oil dirt, moisture, oxide and other impurities inside. As such, no blocking trouble after filling refrigerant in use.

4. Special fan motor, which is low in power consumption, large in air volume, low in noise, and far in air throw, guarantees good performance in humidity and low temp.

5. Equipped with U-shaped electro-thermal tube that's good-in insulation inside the coil, rational gap arrangement and power ability to achieve defrosting performance.

6. Groove-type channel clip, easy to install.

7. Filled with nitrogen before leaving factory.

8. We can also manufacture according your require.

 

THIS TYPE:  DL type can be used at 0°C for saving eggs and vegetables , and this type chiller cooling capacity indicates: T library = ±0°C ΔT=T-T0=7°C, library fin space is 4.5 mm.