PE-70-40-C car painting equipment, auto painting oven, car spray painting machine

Car Spray Booth

Model

PE-70-40-C

Inside Size

L*W*H=7000*4000*2650mm

Outside Size

L*W*H=7120*5670*3400mm

Entrance Door

3-win main entrance door, 3000*2600mm (W*H), thickness of inside outside pre-coated steel:0.6mm

Personnel Door

one pc of personnel door, 800x2000mm (W*H), with pressure latch and automatic door closer

Wall Panels

Thickness of wall panel: 60mm; Pre-coated steel sheet with thickness of 0.6mm, double skinned with polystyrene(EPS) insulation inside, tongue and groove structure

Roof Panels

Pre-painted steel sheet, double skined with 60mm thick polystyrene insulation

Basement and Floor

300mm high raised metal-base with 4 drive in ramps (each 750 x2000mm), fully arranged grating floor.

Lighting

8 units upper inclined ceiling lights, each with 4x36w light tubes. 6 units 4x36w vertical side wall lights

Air Plant Structure

Aluminum frame structure, 0.6 colored steel plate

Intake

2 double-intake centrifugal fans, capacity 25000cmh, belt drive, 2x4kw motors, motorized air flow damper

Extract

1 double-intake centrifugal fan, capacity 25000cmh, belt drive, 1x7.5kw motor, motorized air flow damper

Heating System

Stainless steel heat exchanger, 80 degree working temperature. Italy Riello RG5S oil burner, capacity 260000Kcal/h

By-pass

Pneumatic damper from spraying to baking cycle

Filter System

4 sorts of filters: prefilter, ceiling filter, floor paint-stop filter, extract paint-stop filter

Control System

Reliable components, digital temperature readout, spray and bake temperature settings, bake timer, spray and bake switch, automatic pressure gauge, hour meter, emergency stop, safety thermostat, failure alarm.