Premium Quality Gold Mill, Wet Pan Mill With CE Authentication

The wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore.

As their small investment, high yield, the production cost is low, good benefits, praised by users, domestic alternative to the ball mill equipment. Grind gold machine easy installation and maintenance, small investment, high yield, quick, low-cost production, is the ideal equipment for mine SMEs beneficiation.

The operation and maintenance:

♣The raw material should be put into the machine after the machine running normally.  

♣This machine is not allowed to state with the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again.

♣The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use a feeding equipment.

♣ The bearing part should be add butter regularly.

♣Every bolts should be checked to avoid flexible.

♣The bearing should be changed in time if it is damaged to avoid damage other parts.

♣While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on. If it happened, you should stop the machine to remedy of the trouble.

♣The motor V-belt should be removed while examine and repair the machine for your safe.

Technical Parameter of wet pan mill: