Contact Platform Support
Help CenterRotary Dryer for Furniture Plant Wood Shavings Drying 110 Tpd
Product Spotlights
2.Customizable mineral powder drying line
3.Easy installation & maintenance
4.Global mining project compatible
5.Uniform final moisture control
6.No over-drying mineral powder
7.Adjustable drying temperature
8.Consistent dried powder quality
9.Fine mineral powder drying protection
Related Products
-
Rotary Dryer for Composted Leaves Thermal Process 40 TpdNegotiableMOQ: 1 Set -
Rotary Dryer for Bamboo Fiber Board Raw Material 130 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Compressed Coco Peat Block Processing 140 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Pelletizing Line Sawdust Processing 180 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Gasification Grade Wood Chips Drying 280 TpdNegotiableMOQ: 1 Set
Product Introduction
This 110 tpd rotary dryer for furniture plant wood shavings drying is a professional medium-large capacity continuous drying equipment tailored for furniture factory leftover material resource utilization scenarios. It adopts a low-temperature non-damaging, anti-flying and high-efficiency dehydration structure adapted to the characteristics of light texture, easy flying and strict moisture control of leftover wood shavings from furniture production, with a daily processing capacity of 110 tons of wet raw furniture plant wood shavings. It can reduce the moisture content of raw materials from 52%~65% to the stable 8%~13% required for subsequent particleboard, MDF and high-density biomass pellet production at one time, and the dried shavings can be directly sent to the next-stage deep processing system. It is the core drying equipment to realize the full recycling of furniture factory wood processing leftovers.
Working Principle
The obliquely installed reinforced multi-cylinder insulation main body is driven by a stable frequency-conversion transmission system to rotate at a low and uniform speed. The wet fluffy furniture plant wood shavings are fed into the inner cylinder, and the light materials are continuously lifted and scattered by the built-in special anti-flying soft lifting plates as the cylinder rotates, fully contacting with the low-temperature clean hot air flow. The free moisture in the shavings is evenly evaporated through the multi-stage constant temperature zones, and the dried wood shavings that meet the subsequent deep processing standards are stably discharged from the discharging end, completing the 110-ton daily continuous drying process.
Core Features
This 110 tpd model has multiple targeted advantages for furniture plant wood shavings drying. The low-temperature drying system effectively retains the complete fiber structure of the wood shavings, avoiding the reduction of product strength of subsequent artificial boards. The special anti-flying fully enclosed structure avoids the flying loss of fluffy shavings, and the material recovery rate is as high as 96%. The multi-cylinder waste heat recovery system can make full use of the waste heat from the furniture factory's own heat-conducting oil boiler, reducing the energy consumption per ton of wood shavings by more than 31% compared with ordinary single-cylinder dryers. The 110-ton daily processing capacity perfectly matches the leftover material output rhythm of medium and large-scale panel furniture manufacturing enterprises.
Technical Specifications
| Product Specs (m) | Capacity (T/H) | Main Motor Power (kW) | Main Motor Model | Main Gearbox Model | Ratio |
| φ1.2×10m | 2.5 | 7.5 | Y160M-R3 | ZL50-16-1 | - |
| φ1.5×12m | 3.3 - 4.9 | 10 | Y160L-6B3 | JZQ500-III-2F | - |
| φ1.5×15m | 4 - 6 | 18.5 | Y200L-6 | JZQ500-III-2F | - |
| φ1.8×12m | 4 - 6 | 11 | Y200L-6 | ZQ50-16II-2 | 16.46 |
| φ2.2×12m | 7 - 12 | 18.5 | Y160L-6 | JZQ650-III | 31.5 |
| φ2.2×14m | 7 - 12 | 18.5 | Y160L-6 | JZQ750-III | 31.5 |
| φ2.2×16m | 12 | 30 | Y225M-6 | JZQ750-III | 31.5 |
| φ2.4×14m | 12 | 30 | Y250M-6 | JZQ750-III | 31.5 |
| φ2.4×18m | 10 - 13 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ2.4×20m | 10 - 14 | 37 | Y250M-6 | ZL85-13-1 | 27.16 |
| φ3×20m | 25 | 55 | Y250M-4 | ZL100-16-1 | 41.52 |
| φ3×25m | 32 - 36 | 75 | YR280M-4 | ZL100-16-1 | 41.52 |
Send Inquiry to This Supplier
You May Also Like
-
Rotary Dryer for Shredded Bark Thermal Process 95 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Dense Wood Shavings Drying 120 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Mulched Tree Leaves Processing 35 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Bamboo Charcoal Raw Material Drying 75 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Soil Substrate Coco Peat Drying 110 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Briquette Fuel Sawdust Processing 130 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Heating Station Wood Chips Drying 450 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Mulch Factory Tree Bark Drying 140 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Poultry Bedding Wood Shavings Drying 100 TpdNegotiableMOQ: 1 Set
-
Rotary Dryer for Eco-fuel Leaf Pellet Drying 65 TpdNegotiableMOQ: 1 Set
