BS6387 CWZ Standard Fire Resistant Control Cable FFX200 07SZ1-R
Product Spotlights
BS6387 CWZ standard Fire Resistant Power & Control Cable
450/750V sR Insulated control cables (2-5 cores)
FFX200 07SZ1-R (PH60) (CU/SR/LSZH 450/750V Class 2)
APPLICATION
The 450/750V sR Insulated Fire Resistant control cables are designed, manufactured and tested for general application in power supply and signal wiring, for emergency circuit and fi re circuit control.
STANDARDS
Basic design to BS 7629-1
FIRE PERFORMANCE
| Circuit Integrity | IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180); BS 8434-1 (30mins); BS 5839-1 Clause 26 2d; CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1) |
|---|---|
| Circuit Integrity with mechanical shock | EN 50200(PH60); CEI 20-36/4-0 |
| Circuit Integrity with mechanical shock & water spray | EN 50200 annex E |
| System circuit integrity | DIN 4102-12, E30 depending on lay system |
| Flame Retardance (Single Vertical Wire Test) | EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1* |
| Reduced Fire Propagation (Vertically-mounted bundled wires & cable test) | EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4 |
| Halogen Free | IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1* |
| No Corrosive Gas Emission | IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2* |
| Minimum Smoke Emission | IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2* |
| No Toxic gases | NES 02-713; NF C 20-454 |
Note: Asterisk * denotes superseded standard.
VOLTAGE RATING
450/750 V
CABLE CONSTRUCTION
Conductors: Plain annealed copper wire, stranded according to IEC(EN) 60228 class 2.
Insulation: Fire resistant silicone rubber compound type EI2 as per BS 7655-1.1.
Cabling: The cores are cabled together in concentric layers with suitable non-hygroscopic fillers.
Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.)
COLOUR CODE
Insulation Colour:
Without earth conductor
2 cores blue - brown
3 cores brown - black - grey
4 cores blue - brown - black - grey
5 cores blue - brown - black - grey - black
With earth conductor
3 cores yellow/green - blue - brown
4 cores yellow/green - brown - black - grey
5 cores yellow/green - blue - brown - black - grey
Sheath Colour: Colour red (other colours on request)
Physical AND THERMAL PROPERTIES
Temperature range during operation (fixed state): -30°C – +90°C
Temperature range during installation (mobile state): -20°C – +50°C
Minimum bending radius: 7.5 x Overall Diameter
Electrical PROPERTIES
| Dielectric test: | 2500 V r.m.s. x 5' (core/core) |
|---|---|
| Insulation resistance | ≥300 MΩ x km (at 20°C) |
| Short circuit temperature | 350°C |
Send Inquiry to This Supplier
You May Also Like
-
Instrument Cable RE-2X(C)Y Signal Transmission CableNegotiableMOQ: 1000 Meters
-
Instrument Cable RE-2X (C) H Shielded Signal CableNegotiableMOQ: 1000 Meters
-
Cu/X-HF-110/HFS-110-Tp Flexible Multicore 110°C Low Fire Hazard CableNegotiableMOQ: 1000 Meters
-
N2XH-FE 180/E 90security Cable, Halogen-free, 0,6/1 kVNegotiableMOQ: 1000 Meters
-
AJ-2Y(L)2YDB2Y S(H45) Railway CablesNegotiableMOQ: 1000 Meters
-
RE-2X(st)HSWAH PiMF Fire Resistant Instrumentation CablesNegotiableMOQ: 1000 Meters
-
Fire Resistant Cable Manufacturer | IEC 60331 & BS 6387 Compliant | 1.5mm²-400mm²NegotiableMOQ: 1000 Meters
-
Intrinsically Safe Explosion-proof Instrument Cable | ATEX Hazardous Area Low-smoke, Halogen-free, Fire-resistant Shielded Instrument Signal CableUS$ 2MOQ: 1000 Meters
-
BS 6724 Standards Armoured Power Cables, 600/1000VNegotiableMOQ: 1000 Meters
-
BS EN50288-7 Standards Fire Retardant Instrumentation Cables RE-Y(St)YUS$ 2MOQ: 1000 Meters