Digt Wire Feeding Speed Data Collection
1. Parameters
|
Parameters
|
Description |
|
Range
|
50 m/min |
|
Accuracy
|
±1.5% |
|
Operating power supply
|
15 - 24VDC 200mA |
|
Operating temperature
|
-10~+55℃ |
|
Output mode
|
Modbus-RTU(9600,n,8,1) |
2. Serial port settings
Item Protocol specification
Physical level RS485
Protocol layer Modbus-RTU slave
Transmission rate 9600 bps
Data exchange mode Asynchronous serial, half-duplex
Data length 8bit
Stop bit 1bit
Parity check None
3. Data format
Host sends:
Sensor response:
In the response data, the 4th and 5th bytes represent the real-time gas flow. The 4th byte is the high byte, and the 5th byte is the low byte.
Send Inquiry to This Supplier
You May Also Like
-
Welding Machine Group Control Management SystemNegotiableMOQ: 0 Set
-
Wire Feeding Speed SensorNegotiableMOQ: 0 Unit
-
Welding Informatization SystemNegotiableMOQ: 0 Set
-
Welding Machine Networked Group Control SystemNegotiableMOQ: 0 Set
-
Welding Data CollectionNegotiableMOQ: 0 Set
-
Welding Information Acquisition and Control SystemNegotiableMOQ: 0 Set
-
Da-500 Intelligent Data Acquisition InstrumentNegotiableMOQ: 0 Unit
-
Intelligent Supervision Module for Electric and Gas WeldingNegotiableMOQ: 0 Piece
-
Welding Safety Management SystemNegotiableMOQ: 0
-
Welding Fire Permit Management SystemNegotiableMOQ: 0 Set