Contact Platform Support
Help CenterFoxboro FBMSSW Field Bus Module – Reliable FOUNDATION Fieldbus Connectivity for Foxboro DCS
Related Products
-
Foxboro FBMSVL Fieldbus Module – Reliable H1 Segment Interface for I/A Series / EcoStruxure Foxboro DCSUS$ 4560MOQ: 1 Blade -
Foxboro FCM2F2 P0914YZ Optical Fiber Communication Extender – Extend I/A Series Links With Noise Immunity and DistanceUS$ 3560MOQ: 1 Blade
-
FOXBORO FDC280 RH101FQ Field Device Controller – High-availability Control for Smart Field DevicesUS$ 2560.00MOQ: 1 Blade
-
Foxboro FEM100 P0973CA Fieldbus Expansion Module – Extend I/A Series Fieldbus Capacity With Clean, Reliable Backplane ExpansionUS$ 2560.00MOQ: 1 Blade
-
Foxboro H92 H92A049E0700 Analog Input Module – Stable 4–20 mA Acquisition for I/A Series ExpansionsUS$ 2560.00MOQ: 1 Blade
Warranty: 365 days
Lead time: typically 1 week if in stock; no more than one month at the latest
Payment terms: 50% advance payment; full payment prior to delivery
Express delivery: FedEx, UPS, DHL
FOUNDATION Fieldbus H1 segments – Supports FF H1 (31.25 kbps) for direct connection of compliant field devices on shielded twisted pair.
Redundant architecture ready – Can be deployed as a redundant pair to improve availability in critical loops, which in many cases reduces unplanned downtime.
Galvanic isolation – Segment-to-system isolation helps protect the controller bus from field disturbances and ground noise.
Fits Foxboro Series 2 baseplates – Single‑wide mechanical format for quick installation, swap, and spares management.
Integrated diagnostics – Status LEDs and system diagnostics simplify commissioning and troubleshooting at the cabinet.
Flexible field wiring – Works with standard Foxboro termination assemblies, keeping wiring neat and serviceable.
Broad device compatibility – Interoperates with most FOUNDATION Fieldbus H1 instruments when configured according to IEC 61158‑2 practices.
| Brand / Model | Foxboro FBMSSW Field Bus Module |
| HS Code | 8537.10 (Boards/panels for electric control, for industrial use) |
| Power Requirements | Nominal 24 VDC supplied via Foxboro Series 2 FBM baseplate (consumption typically |
| Operating Temperature | 0 to 60 °C (cabinet‑mounted; non‑condensing humidity) |
| Signal I/O Types | FOUNDATION Fieldbus H1 segments (shielded twisted pair), galvanically isolated from system bus |
| Communication Interfaces | FF H1 31.25 kbps on field side; Foxboro FBM backplane/system bus on baseplate side |
| Mechanical Format | Single‑wide Foxboro FBM module; plug‑in to Series 2 baseplate |
| Installation Method | DIN‑rail‑mounted baseplate with field wiring through a termination assembly; supports redundant pairing |
| Compliance | CE, UL, RoHS (configuration and label dependent; many units rated for Class I, Div 2 / Zone 2) |
Plants that standardize on Foxboro DCS and run mixed protocols typically use FBMSSW to add and maintain FF H1 networks at the controller level:
Oil & Gas: wellhead RTU tie-ins, separators, and pipeline stations with FF instruments.
Chemicals & Petrochem: reactor temperature/flow loops with interoperable FF transmitters and positioners.
Power & Utilities: water/steam cycle monitoring with digital valve positioners over FF.
Pharma & Biotech: skid integration where OEMs supply FF devices with GAMP-compliant documentation.
One thing I appreciate is how it supports migration projects—teams can keep the baseplate and simply slide in the module, then commission FF devices segment by segment. A maintenance lead recently mentioned that moving from a mixed HART/FF layout to full FF on one unit cut their cabinet wiring time by about 20%.
Reliability – Redundant-ready design and isolation reduce process interruptions in most cases.
Compatibility – Works within the Foxboro FBM ecosystem and with standard FF H1 field devices.
Lifecycle cost control – Reuses existing baseplates and terminations; minimizes cabinet rework, which typically lowers install costs.
Diagnostics & commissioning – Segment health indicators and system diagnostics speed up loop check and device replacement.
Support & spares – Single‑wide format simplifies stocking; easy module swap keeps downtime short.
Cabinet & environment – Mount on Series 2 baseplate in a ventilated panel; 0–60 °C, non‑condensing. Provide clean ground and surge protection.
Wiring – Use FOUNDATION Fieldbus Type A shielded twisted pair; two terminators per segment; avoid star topologies unless using compliant couplers.
Segment power – Feed FF segments via certified power conditioners/isolators; do not draw device power directly from the module.
Redundancy – For high availability, deploy as a redundant pair on separate power feeds and route segments distinctly where practical.
Safety – De‑energize before insertion/removal; for hazardous areas, ensure the exact module and accessories carry the appropriate Div/Zone markings.
Routine maintenance – Check segment current and noise levels, clean terminals annually, review device firmware/DTMs, and keep spares tested.
From my experience, most commissioning issues trace back to improper segment termination or shielding. A quick scope check on the H1 waveform often saves hours.
Quality & CertificationsConformity: CE and UL; RoHS compliant on most current production units
Typical installation ratings: Class I, Division 2 / ATEX Zone 2 (verify the nameplate on the exact module variant)
Manufacturer warranty: 12 months (365 days)
Foxboro Series 2 baseplate (DIN‑rail mounted), single‑wide slots
FOUNDATION Fieldbus power conditioner/segment coupler with integrated terminators
Termination assembly (TA) compatible with FF H1 field wiring
Shielded twisted pair Type A FF cable and approved surge protection for outdoor runs
Note: Specifications above reflect the Foxboro FBM family behavior for FF H1 modules and, in most cases, match FBMSSW deployments. If your site has a specific build code or hazardous-area rating requirement, share it and I’ll align the exact variant.
Send Inquiry to This Supplier
You May Also Like
-
Foxboro IPM2-P0904HA Series Industrial Power Module – Stable, Cabinet-grade Power for I/A Series BaseplatesUS$ 2560.00MOQ: 1 Blade
-
Foxboro P0904AK GCIO Tabletop Module – Compact Bench I/O and Analyzer Interface for Fast DCS IntegrationUS$ 2560.00MOQ: 1 Blade
-
Foxboro P0916AA Field Terminal Assembly – A Dependable Field Wiring Interface for I/A Series FBMsUS$ 2560.00MOQ: 1 Blade
-
Foxboro P0916AE Compression Terminal Base – Reliable Field Wiring Interface for I/A Series FBMsUS$ 2560.00MOQ: 1 Blade
-
FOXBORO P0916AJ I/O Interface Module – Stable Field Signal Interfacing for I/A Series DCSUS$ 2560.00MOQ: 1 Blade
-
Foxboro P0916BX Termination Assembly – Reliable Field Wiring Interface for I/A Series FBMsUS$ 2560.00MOQ: 1 Blade
-
Foxboro P0916CC I/A Series Module – Form-Fit Replacement for I/A Series Control SystemsUS$ 2560.00MOQ: 1 Blade
-
FOXBORO P0916PH / P0916JS Terminal Block Module – Reliable Field Wiring Interface for I/A Series FBMsUS$ 2560.00MOQ: 1 Blade
-
FOXBORO P0916XT Contact Sense Input Module – Reliable Dry-contact Monitoring for Foxboro DCSUS$ 2560.00MOQ: 1 Blade
-
Foxboro P0917MF Control Processor – Reliable CPU Module for I/A Series (200 Series) Distributed ControlUS$ 2560.00MOQ: 1 Blade
