Contact Platform Support
Help CenterGE DS200SDCIG2AHB – Signal Conditioner/Isolator Board for Mark V Turbine Control
Related Products
-
GE DS200SDCIG1ABA – DCI I/O Board for GE AC/DC-2000 Drives and EX2000 Excitation SystemsUS$ 3216.00MOQ: 1 Blade -
GE DS200SLCCG1AEE – LAN/Serial Communication Card for GE Drives and Excitation SystemsUS$ 3216.00MOQ: 1 Blade
-
GE DS200SLCCG1AFG – LAN/Serial Communication Card for GE Series 2000 Drives and Excitation SystemsUS$ 3216.00MOQ: 1 Blade
-
GE DS200SLCCG1ACC LAN Communications Card – Reliable I/O Networking for Mark V and GE Drive SystemsUS$ 3216.00MOQ: 1 Blade
-
GE DS200TCQAG1BHF Digital I/O Module – Reliable Discrete Signal Interface for Mark V ControlsUS$ 3216.00MOQ: 1 Blade
Warranty: 365 days
Lead Time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment before delivery
Shipping: FedEx, UPS, DHL (express worldwide)
Galvanic isolation – Helps break ground loops and reduce noise from field wiring, which in many cases cuts nuisance trips.
Signal conditioning – Scales and filters analog inputs so the Mark V core receives stable, usable values.
G2 variant compatibility – Aligned with Mark V I/O maps that require the G2 board option; typically a drop‑in replacement for DS200SDCIG2 assemblies.
Backplane integration – Interfaces through GE’s Mark V backplane and ribbon headers for quick swap‑out during outages.
Field-proven design – Used across gas/steam turbine controls where steady analog performance is crucial.
Serviceable hardware – Jumpers and test points allow practical field checks and, where applicable, channel configuration.
| Brand / Model | GE – DS200SDCIG2AHB (SDCI Board, G2 variant) |
| HS Code | 8538.90 (Parts suitable for use with industrial control apparatus) |
| Power Requirements | Supplied via Mark V backplane; typically uses +5 VDC and auxiliary rails provided by the rack |
| Operating Temperature | Control cabinet environment; typically 0 to +60 °C when installed per GE panel guidelines |
| Signal I/O Types | Isolated analog signal conditioning channels (voltage/current scaling and filtering; factory-configured) |
| Communication Interfaces | Proprietary Mark V backplane edge connectors and ribbon headers (board‑to‑board) |
| Installation Method | Plug‑in PCB for Mark V racks; secured with standard card guides and fasteners |
This board is commonly found in GE Mark V Speedtronic systems across:
Gas and steam turbine control in power generation
Oil & gas compressor trains and process turbines
Industrial drives and balance‑of‑plant loops where stable analog inputs are essential
One thing I appreciate is how it stabilizes low‑level analog signals coming from long cable runs. A maintenance lead at a combined‑cycle plant told us nuisance analog spikes dropped noticeably after swapping in a healthy SDCI board during a hot‑section outage.
Reliability: Designed for harsh cabinet environments; typically very low failure rates when ventilation is adequate.
Compatibility: Matches DS200 Mark V architecture; avoids re‑engineering I/O or logic.
Downtime reduction: True plug‑replace form factor keeps outage windows tight.
Cost control: Refurb/exchange programs available in many cases; helps manage lifecycle budgets.
Technical support: We can assist with cross‑checks for G1 vs G2 usage and jumper settings prior to shipment.
Cabinet standards: Install in a clean, dry Mark V rack with adequate airflow; keep ambient within control room spec.
Wiring: Verify ribbon and backplane connectors are fully seated; avoid cable strain and sharp bends.
ESD safety: Handle with a grounded wrist strap; store in anti‑static packaging.
Jumpers/adjustments: Confirm any required jumper positions or potentiometer trims per your site’s I/O list.
Routine checks: Visual inspection each outage; clean dust with dry, oil‑free air; reseat connectors if needed.
Records: Note serial/revision (AHB) in maintenance logs to keep the spare strategy consistent.
Quality system: Typically supported under ISO 9001 quality controls for manufacturing and repair.
Compliance: CE/UL conformity applies at the system level for Mark V panels; board‑level markings may vary on legacy hardware.
Environmental: RoHS applicability can vary for original‑era parts; replacements are screened for functional equivalence and safety.
Warranty: 365 days from delivery.
If you can share your current panel part list or a photo of the installed SDCI slot, we’ll double‑check the DS200SDCIG2AHB revision fit and confirm lead time. In most cases, that pre‑check saves a truck roll once the unit arrives.
Send Inquiry to This Supplier
You May Also Like
-
GE DS215DMCBG1AZZ03A – Processor and Communication Card for Mark V / GE Drive SystemsUS$ 3216.00MOQ: 1 Blade
-
GE DS200TCQCG1BKG – Mark V I/O Control Module for Reliable Turbine System Signal ConditioningUS$ 3216.00MOQ: 1 Blade
-
GE DS3800HSCG1E1F Processor Module for Speedtronic Mark IV Turbine ControlUS$ 3216.00MOQ: 1 Blade
-
FANUC A06B-6110-H011 Power Supply Module – Stable 200V-class Backbone for αi Servo/spindle SystemsUS$ 1216.00MOQ: 1 Blade
-
FANUC A06B-0253-B400 AC Servo Motor – High‑Torque 200V‑Class Drive for Precise Axis ControlUS$ 216.00MOQ: 1 Blade
-
FANUC A06B-6111-H015#H550 αi Spindle Amplifier Module – Stable 400V-class Drive for Modern Machine ToolsUS$ 216.00MOQ: 1 Blade
-
FANUC A06B-0272-B605 AC Servo Motor – Energy‑Saving Motion Drive for Robotic Axes and High-Precision AutomationUS$ 3216.00MOQ: 1 Blade
-
Emerson/GE PACSystems RX3i EPSCPE100-ABAC – Compact CPU Module for DCS/PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE DS200TCPAG1AJD Turbine Control Processor Board – Core Processing for Speedtronic Mark V ControlUS$ 1216.00MOQ: 1 Blade
-
GE DS2020DACAG2 AC/DC Power Conversion Module – Stable Control Power for GE Industrial CabinetsUS$ 1216.00MOQ: 1 Blade
