Contact Platform Support
Help CenterFANUC A06B-6111-H015#H550 αi Spindle Amplifier Module – Stable 400V-class Drive for Modern Machine Tools
Related Products
-
FANUC A06B-0272-B605 AC Servo Motor – Energy‑Saving Motion Drive for Robotic Axes and High-Precision AutomationUS$ 3216.00MOQ: 1 Blade -
Emerson/GE PACSystems RX3i EPSCPE100-ABAC – Compact CPU Module for DCS/PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE DS200TCPAG1AJD Turbine Control Processor Board – Core Processing for Speedtronic Mark V ControlUS$ 1216.00MOQ: 1 Blade
-
GE DS2020DACAG2 AC/DC Power Conversion Module – Stable Control Power for GE Industrial CabinetsUS$ 1216.00MOQ: 1 Blade
-
GE DS2020FECNRP020A – Communication and Control Interface Module for GE Drive/Excitation SystemsUS$ 1216.00MOQ: 1 Blade
Warranty: 365 days
Delivery: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
400V-class αi spindle drive (#H550): Suited for 380–480 VAC plants, typically used on mid-range machining centers and lathes.
High-speed fiber-optic CNC link: FANUC serial fiber interface ensures responsive speed control, spindle orientation, and rigid tapping support.
Efficient power section: Optimized switching and heat dissipation to keep cabinet temperatures stable and energy use under control.
Comprehensive protections: Overcurrent, overvoltage, undervoltage, and thermal safeguards, plus ground fault and alarm diagnostics.
Regeneration-ready: Supports dynamic braking; external braking resistor can be applied where required by duty cycle.
Service-friendly design: Front-access terminals, status LEDs, and clear alarm codes reduce troubleshooting time.
Proven ecosystem compatibility: Works with FANUC αi spindle motors and standard FANUC CNCs used across global production lines.
| Brand / Model | FANUC A06B-6111-H015#H550 (αi Spindle Amplifier Module, 400V class) |
| HS Code | 850440 (Static converters / power electronic converters) |
| Power Requirements | 3-phase 380–480 VAC, 50/60 Hz (400V-class); protective earth required; follow FANUC wiring specs |
| Operating Temperature | 0 to 55°C (non-condensing), with derating and adequate cabinet ventilation as needed |
| Signal I/O Types | Spindle motor power U/V/W; digital ready/alarm terminals; braking resistor connection (if applied); encoder feedback handled via amplifier and sent to CNC |
| Communication Interfaces | FANUC fiber-optic serial link to CNC (FSSB/S-Link, depending on CNC generation) |
| Installation Method | Vertical panel/cabinet mounting in a sealed electrical cabinet with forced-air cooling |
You’ll typically see the A06B-6111-H015#H550 in:
CNC machining centers dealing with steel, aluminum, and composite cutting where steady spindle torque is critical
CNC lathes and turn-mill machines needing accurate spindle orientation for live tooling
Grinding machines requiring smooth, low-vibration spindle speed control
Production lines with FANUC CNCs standardizing on 400V-class drives
From my experience, shops upgrading older drives to this module often report cleaner starts, faster orientation, and fewer nuisance alarms when cabinet cooling is properly set.
Reliability that reduces downtime: Robust protection and diagnostics; spare parts are widely available.
Compatibility with FANUC ecosystems: Pairs with αi spindle motors and mainstream FANUC CNC controllers, easing commissioning.
Energy and thermal efficiency: Helps maintain stable cabinet temperatures, which, in many cases, prolongs component life.
Lower integration risk: Standard fiber-optic link and familiar parameter sets shorten changeover time for maintenance teams.
A maintenance lead in an automotive line told us they swapped to this H015 module on a twin-pallet machining center and noticed orientation consistency improve immediately, with less time spent chasing intermittent spindle alarms.
Installation & MaintenanceCabinet environment: Mount vertically in an IP-rated enclosure; ensure forced-air ventilation and unobstructed airflow around heatsinks.
Power and grounding: Use 3-phase 380–480 VAC with dedicated PE ground. Keep motor leads short, shielded where applicable, and segregated from signal cables.
Braking resistor: Size and mount an external resistor if your duty cycle demands frequent rapid decel; follow FANUC recommendations.
Fiber link handling: Route fiber-optic cables with gentle bends; keep clear of high-voltage conductors to minimize noise.
Parameter management: Back up CNC parameters and spindle settings before replacement; confirm hardware suffix compatibility (#H550) to avoid mismatch.
Routine checks: Quarterly dust cleaning, terminal torque checks, fan inspection, and verifying alarm history. Firmware/parameter updates should follow OEM guidance.
Safety: Lockout/tagout, discharge DC bus fully, and confirm absence of residual voltage before servicing.
Certifications: CE marked; UL recognition for components; RoHS compliance on most recent builds.
Manufacturing quality: Built under stringent quality systems (ISO 9001 at manufacturing sites).
Warranty: 365-day coverage from our side for repair/replace, subject to standard terms.
FANUC αi spindle motors matched to the H015 rating
Braking resistor assemblies sized for your deceleration profile
Fiber-optic link cables for CNC connection (FANUC spec)
Shielded motor power cables and grounding kits
Cooling fans and filter media for cabinet airflow
Send Inquiry to This Supplier
You May Also Like
-
GE Fanuc IC697ADC701 – Letter and Number Display Coprocessor Module for Series 90-70 RacksUS$ 1216.00MOQ: 1 Blade
-
GE IC693CPU374-JY Core Processor Module – Ethernet-enabled CPU for Series 90-30 Control SystemsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC693ALG220F – 4‑Channel Analog Voltage Input for Series 90‑30 PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ALG320 – Series 90-70 8-Channel Analog Input Module for Voltage/Current SignalsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697CPM914 GMR Redundant CPU Module – High‑availability Control for Series 90‑70 PlatformsUS$ 1216.00MOQ: 1 Blade
-
GE DS3820LT4A.1C1A – Signal Conditioning and Drive Interface Module for GE Mark IV/industrial Drive RacksUS$ 1216.00MOQ: 1 Blade
-
GE IC687BEM742-EB I/O Expansion Module – Scalable Rack Expansion for GE Industrial Control SystemsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697CPU731 – Series 90-70 CPU Module for High-performance PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE IC695PBM300 – PROFIBUS DP Master Module for PACSystems RX3iUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ACC721 Rack Fan Assembly – Cooling Solution for Series 90-70 PLC RacksUS$ 1216.00MOQ: 1 Blade
