Contact Platform Support
Help CenterGE DS2020DACAG2 AC/DC Power Conversion Module – Stable Control Power for GE Industrial Cabinets
Related Products
-
GE DS2020FECNRP020A – Communication and Control Interface Module for GE Drive/Excitation SystemsUS$ 1216.00MOQ: 1 Blade -
GE Fanuc IC697ADC701 – Letter and Number Display Coprocessor Module for Series 90-70 RacksUS$ 1216.00MOQ: 1 Blade
-
GE IC693CPU374-JY Core Processor Module – Ethernet-enabled CPU for Series 90-30 Control SystemsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC693ALG220F – 4‑Channel Analog Voltage Input for Series 90‑30 PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ALG320 – Series 90-70 8-Channel Analog Input Module for Voltage/Current SignalsUS$ 1216.00MOQ: 1 Blade
Warranty period: 365 days
Delivery time: 1 week for in-stock items; no more than one month at the latest
Payment method: 50% advance payment; full payment prior to delivery
Express delivery methods: FedEx, UPS, DHL
AC to DC conversion for control electronics: Provides regulated low-voltage rails typically used by logic and I/O circuits, helping stabilize sensitive loads.
Noise-tolerant design: Built for electrically noisy industrial cabinets; in many cases it reduces ripple and interference that upset legacy boards.
Form/fit/function replacement: Plug-in format matches GE cabinet hardware, keeping panel modifications to a minimum.
Protection features: Over-current and over-voltage protection are typically included to safeguard downstream boards.
Serviceable layout: Clear connectors and test points make commissioning and troubleshooting faster for field techs.
| Brand / Model | GE DS2020DACAG2 |
| HS Code | 8504.40 (Static converters – AC/DC power supply modules) |
| Power Requirements | AC input from cabinet control power (commonly 120/240 VAC, 50/60 Hz); DC outputs supply regulated low-voltage rails for logic and I/O |
| Operating Temperature | Typically 0 to +60°C (control cabinet environment) |
| Signal I/O Types | AC mains input; low-voltage DC outputs via backplane/card-edge connectors |
| Communication Interfaces | None (power conversion module) |
| Installation Method | Plug-in module for GE control cabinet backplane; retained with front hardware for secure mounting |
| Dimensions & Weight | Board-level DS2020-format module; compact, serviceable footprint for standard GE racks |
This module is typically deployed in GE industrial control cabinets found in power generation, medium-voltage drives, and excitation systems. I often see it supporting control electronics in:
Gas/steam turbine control panels (legacy and retrofit cabinets)
GE drive systems for metals, mining, paper, and water treatment
Excitation and auxiliary power control (where stable DC rails are required)
Process automation cabinets requiring dependable control power
One thing I appreciate is how it keeps older cabinets running without redesign. A maintenance lead at a combined-cycle plant told us: “Swapped the DS2020DACAG2 in under an hour and our logic rails stabilized immediately—no nuisance trips since.”
Reliability: Clean, regulated DC rails help reduce intermittent faults across sensitive I/O cards.
Compatibility: Designed for GE racks—usually no mechanical rework or rewiring beyond standard cabinet practices.
Downtime reduction: Fast, plug-in replacement typically shortens outage windows for maintenance teams.
Cost control: Extends the life of installed assets, delaying costly system-wide upgrades.
Support: Application guidance and post-install follow-up so the module lands right the first time.
Cabinet environment: Install in a clean, ventilated enclosure; keep ambient within 0–60°C and avoid condensation.
Power wiring: Feed from an isolated control transformer (commonly 120/240 VAC, 50/60 Hz). Verify grounding and polarity before energizing.
Mounting: Seat firmly in the backplane/card-edge connector and secure front fasteners to prevent vibration-induced loosening.
Safety: De-energize cabinet, discharge stored energy, and follow lockout/tagout; handle the board using ESD precautions.
Commissioning: Measure output rails with a calibrated DMM and confirm ripple is within your site’s acceptance criteria.
Routine care: Quarterly dust removal, connector inspection, and check of cabinet fans/filters; re-torque terminal hardware if applicable.
Manufacturing typically aligned to ISO 9001 quality systems
Meets CE/UL expectations for industrial control equipment where applicable
RoHS applicability may vary by production year and region
Manufacturer’s warranty: 365 days
Send Inquiry to This Supplier
You May Also Like
-
GE Fanuc IC697CPM914 GMR Redundant CPU Module – High‑availability Control for Series 90‑70 PlatformsUS$ 1216.00MOQ: 1 Blade
-
GE DS3820LT4A.1C1A – Signal Conditioning and Drive Interface Module for GE Mark IV/industrial Drive RacksUS$ 1216.00MOQ: 1 Blade
-
GE IC687BEM742-EB I/O Expansion Module – Scalable Rack Expansion for GE Industrial Control SystemsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697CPU731 – Series 90-70 CPU Module for High-performance PLC ControlUS$ 1216.00MOQ: 1 Blade
-
GE IC695PBM300 – PROFIBUS DP Master Module for PACSystems RX3iUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ACC721 Rack Fan Assembly – Cooling Solution for Series 90-70 PLC RacksUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697BEM733 Bus Expansion Module – Reliable Rack-to-rack Expansion for Series 90-70 SystemsUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697ALG440 – 90-70 Analog Input Expansion Module for Reliable Voltage/current Signal AcquisitionUS$ 1216.00MOQ: 1 Blade
-
GE Fanuc IC697BEM711 Bus Expansion Module – Extend Your Series 90-70 Backplane to More RacksUS$ 1216.00MOQ: 1 Blade
-
GE 469-P5-HI-A20-E: Stop Guessing When Motors FailUS$ 1216.00MOQ: 1 Blade
