Contact Platform Support
Help CenterHONEYWELL CC-PWRN01 Power Module – Reliable Backplane Power for Series C/Experion Nodes
Related Products
-
HONEYWELL FC-BKM-0001 Battery & Key Switch Module for Control and Fire Panel Power ManagementUS$ 1216.00MOQ: 1 Blade -
Honeywell 05704-A-0145 Four Channel Control Card: Your Reliable Workhorse for Industrial Process ControlUS$ 216.00MOQ: 1 Blade
-
Honeywell 2MLR-CPUHT Redundant CPU Module: Keep Critical Processes Running Through FailuresUS$ 216.00MOQ: 1 Blade
-
Honeywell 51301874-100 Thermocouple Multiplexer Logic Board: Reliable Signal Management for Critical ProcessesUS$ 216.00MOQ: 1 Blade
-
Honeywell 05704-A-0146 Fire Control Card: Your System's Critical Safety SentinelUS$ 216.00MOQ: 1 Blade
Warranty: 365 days
Lead time: Typically 1 week if in stock; no more than 1 month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
Series C backplane power – Feeds regulated power to the controller and I/O stack; no user-facing I/O.
24 VDC plant supply – Typically operates from a 24 VDC industrial supply, helping standardize cabinet power.
Stable output for noisy environments – Designed for industrial EMC conditions; keeps nodes running under voltage ripple and transients.
Plug-in replacement – Swap on the Series C carrier with minimal wiring change, reducing MTTR in most cases.
Compact form factor – Frees cabinet space compared with third-party supplies and ad‑hoc wiring.
Backplane-only communication – No external comms to configure; integrates natively through the Series C backplane.
| Brand / Model | HONEYWELL CC-PWRN01 |
| HS Code | 8538.90 (Parts suitable for apparatus of 8535/8536/8537 – typical for DCS/PLC power modules) |
| Power Requirements | 24 VDC nominal (typical range 18–30 VDC, depending on cabinet design) |
| Operating Temperature | 0 to +50 °C (typical for Series C installations) |
| Signal I/O Types | None (power distribution to backplane only; no user I/O) |
| Communication Interfaces | Series C backplane interface (no external ports) |
| Installation Method | Plug-in on Series C carrier/termination assembly within a control cabinet (DIN-rail mounted backplate) |
This module is commonly deployed in Experion PKS / Series C nodes across:
Refining and petrochemical units where controller uptime is critical
Pharmaceutical batch skids and cleanroom utilities needing stable 24 VDC architectures
Power generation balance-of-plant panels with dense I/O stacks
Pulp & paper and specialty chemicals using C300-based control strategies
A maintenance supervisor at a chemicals site shared that swapping a failed supply with a CC-PWRN01 took them under 10 minutes, largely because the mechanical footprint and connectors matched their existing Series C layout.
Reliability – Purpose-built for Honeywell nodes; fewer surprises than generic DIN supplies.
Compatibility – Fits Series C backplane power expectations, reducing integration risk.
Cost control – Faster replacement and no custom wiring usually means lower downtime cost.
Lifecycle support – Easier spares planning for standard Honeywell part numbers.
Cabinet environment – Install in a clean, dry control cabinet with adequate ventilation; avoid heat sources.
Wiring – Use a regulated 24 VDC feed, sized for the full node load; maintain proper grounding and cable segregation from high-voltage lines.
Mounting – Plug into the Series C carrier; ensure connectors are seated and any retaining screws are fully tightened.
Safety – De-energize the cabinet before handling; verify absence of voltage on the 24 VDC feed.
Routine checks – Periodically inspect terminals for looseness, dust buildup, and signs of thermal stress; clean with dry compressed air.
Firmware/updates – Not applicable for a power-only module; keep node documentation current for configuration references.
Honeywell Series C hardware is typically CE-marked and RoHS compliant; many installations also reference UL/CSA recognition for panel use. If you need region-specific documentation (CE DoC, RoHS statement, UL file), we can share what’s current for the CC-PWRN01. Our supplied units carry a 365-day warranty.
Send Inquiry to This Supplier
You May Also Like
-
Honeywell 51308351-175: Your Reliable Analog Output Workhorse for Experion PKS SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell 51308371-175 Digital Output Module: Precision Control for Critical Industrial SwitchingUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAIX01 Analog Input Module: Reliable Signal Acquisition for Industrial ProcessesUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAIX51 C300 Controller: Your Uninterrupted Process BackboneUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAON11: Your Reliable Analog Output Workhorse for Process ControlUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAOX01: Your Analog Output Workhorse for Tight Control LoopsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAOX11 Analog Output Module: Precision Control for Demanding Industrial SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDIL01 Digital Input Module: Reliable Signal Capture for Industrial Control SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDOB01: Your Workhorse for Reliable Digital Output ControlUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDIL11: Your Reliable 16-Channel Digital Input Workhorse for Industrial Signal CaptureUS$ 216.00MOQ: 1 Blade
