Contact Platform Support
Help CenterHONEYWELL FC-BKM-0001 Battery & Key Switch Module for Control and Fire Panel Power Management
Related Products
-
Honeywell 05704-A-0145 Four Channel Control Card: Your Reliable Workhorse for Industrial Process ControlUS$ 216.00MOQ: 1 Blade -
Honeywell 2MLR-CPUHT Redundant CPU Module: Keep Critical Processes Running Through FailuresUS$ 216.00MOQ: 1 Blade
-
Honeywell 51301874-100 Thermocouple Multiplexer Logic Board: Reliable Signal Management for Critical ProcessesUS$ 216.00MOQ: 1 Blade
-
Honeywell 05704-A-0146 Fire Control Card: Your System's Critical Safety SentinelUS$ 216.00MOQ: 1 Blade
-
Honeywell 51308351-175: Your Reliable Analog Output Workhorse for Experion PKS SystemsUS$ 216.00MOQ: 1 Blade
Warranty: 365 days from shipment.
Lead time: In stock items typically ship in 1 week; no more than one month at the latest.
Payment terms: 50% advance payment; full payment prior to delivery.
Express options: FedEx, UPS, DHL.
Integrated battery interface – Provides a dedicated connection point for the panel’s standby batteries (commonly 24 VDC from two 12 V SLA in series), streamlining wiring.
Maintained key switch – Key-operated, maintained contact for enable/disable or service mode; you might notice this reduces accidental changes by requiring a physical key.
Status routing and safety – Arranged to support typical battery presence and isolation checks, aiding safe commissioning and maintenance.
Panel/chassis mounting – Designed for clean installation inside Honeywell control enclosures; keeps battery terminations and the keyswitch accessible but protected.
Service-friendly design – One thing I appreciate is the straightforward layout—techs can isolate power, change batteries, and lock out unauthorized operation quickly.
Passive module – No on-board communication; reduces points of failure and improves long-term reliability.
| Brand / Model | HONEYWELL FC-BKM-0001 |
| HS Code | 8531.90 (Parts of electric sound/visual signaling apparatus – typical classification for fire/control panel parts) |
| Power Requirements | 24 VDC nominal from host panel; interfaces with standby battery pair (commonly 2 × 12 V sealed lead-acid in series) |
| Operating Temperature | 0 to +49°C (typical control cabinet environments; avoid condensation) |
| Signal I/O Types | Maintained key switch dry contact (e.g., SPST/DPST depending on panel wiring); battery positive/negative terminations via screw/pluggable terminals |
| Communication Interfaces | None (passive module; uses panel I/O) |
| Installation Method | Internal panel/chassis mounting within Honeywell control cabinet; secure with standoffs or designated bracket |
This module is typically deployed in:
Fire alarm and life-safety panels – Stable battery interface and controlled keyswitch access for panel enable/disable.
Industrial safety interlocks – Where a maintained key position is needed to authorize maintenance or inhibit outputs.
Building control cabinets – Facilities that require reliable 24 VDC backup power and locked operator access, such as hospitals, airports, and data centers.
Utilities and oil & gas – Cabinets that must remain powered during outages while restricting local operations to authorized staff.
Reliability – Passive design reduces failure modes; from my experience, fewer electronics here often means fewer surprises in the field.
Compatibility – Designed around Honeywell control panel practices for 24 VDC standby systems and maintained key control.
Service time savings – Faster battery changeover and straightforward isolation help cut downtime during routine checks.
Procurement clarity – A single, matched module for battery connection and keyswitch function avoids piecing together third-party parts.
Support – Easier to document and maintain within a Honeywell-based panel architecture; spares stocking becomes simpler.
Cabinet environment – Install in a clean, dry enclosure with adequate ventilation. Maintain ambient 0–49°C, non-condensing.
Mounting – Use the specified backplate/bracket points. Keep battery leads short and neatly routed away from signal wiring to minimize noise.
Wiring – Follow the panel’s polarity markings. Typical setup uses 2 × 12 V SLA batteries in series for 24 VDC; torque terminals as recommended by Honeywell.
Safety – Isolate mains and battery before servicing. Remove battery negative first and reconnect it last. Observe ESD precautions.
Routine maintenance – Function-test the keyswitch quarterly. Perform battery load tests semi-annually and replace batteries per site policy (often every 3–5 years). Keep terminals clean and tight.
Firmware – Not applicable to this passive module; if the host panel firmware is updated, re-verify keyswitch logic and battery supervision.
Certifications – Typically supplied for use in UL and CE-marked control panel systems; RoHS compliant components are commonly used by Honeywell.
Manufacturing – Built under ISO 9001 quality systems in most cases.
Warranty – 12-month warranty (365 days) from shipment.
24 VDC sealed lead-acid batteries (commonly 2 × 12 V, matched capacity as per panel load calculations)
Battery harness/terminals and approved fusing as specified by the host Honeywell panel
Replacement key set or keyed barrel (matching FC-BKM-0001 lock profile)
Panel power supply/charger module compatible with the same Honeywell cabinet
Field feedback: A facilities engineer at a hospital mentioned the keyswitch feels robust and the battery terminals are easy to access, which shaved minutes off their quarterly checks—small win, but it adds up across multiple panels.
Send Inquiry to This Supplier
You May Also Like
-
Honeywell 51308371-175 Digital Output Module: Precision Control for Critical Industrial SwitchingUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAIX01 Analog Input Module: Reliable Signal Acquisition for Industrial ProcessesUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAIX51 C300 Controller: Your Uninterrupted Process BackboneUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAON11: Your Reliable Analog Output Workhorse for Process ControlUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAOX01: Your Analog Output Workhorse for Tight Control LoopsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAOX11 Analog Output Module: Precision Control for Demanding Industrial SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDIL01 Digital Input Module: Reliable Signal Capture for Industrial Control SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDOB01: Your Workhorse for Reliable Digital Output ControlUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDIL11: Your Reliable 16-Channel Digital Input Workhorse for Industrial Signal CaptureUS$ 216.00MOQ: 1 Blade
-
Honeywell 05704-A-0144 Four-Channel Catalytic Input Control Card: Precision Gas Detection for Hazardous EnvironmentsUS$ 2126.00MOQ: 1 Blade
