Contact Platform Support
Help CenterABB 5SHX0360D0001 (Order Code 3BHL000384P0101) – IGCT Gate Unit Module for High-Power Converters
Related Products
-
ABB UAC389AE01 (HIEE300888R0001) – Industrial Control/Interface Module for ABB Procontrol / Advant SystemsUS$ 2360.00MOQ: 1 Combo -
ABB 5SHX0445D0001 IGCT Module – High-reliability Press-pack Switching for Medium-voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB 5SHX10H6010 IGCT Module – Press-pack High-power Switch for Medium-voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB IGCT 3BHL000385P0101 – High‑power Press‑pack IGCT for Medium‑voltage Drives and ConvertersUS$ 6360.00MOQ: 1 Combo
-
ABB 5SHX1060H0002 IGCT Gate Unit – Reliable High-current Drive for Medium-voltage Power ConvertersUS$ 9360.00MOQ: 1 Combo
Warranty: 365 days
Delivery: In-stock items ship in about 1 week; no more than one month at the latest
Payment: 50% advance payment; full payment before delivery
Express options: FedEx, UPS, DHL
Optimized IGCT Drive – Provides the controlled gate current and timing profile an IGCT needs for low losses and secure turn-off.
Integrated Protection – From my experience, ABB gate units include fast fault detection and safe turn-off behavior that helps protect the IGCT and converter stack.
Fiber-Optic Signaling (typical) – Many ABB IGCT gate units use fiber for trigger and status, improving noise immunity in high dV/dt environments.
Direct-Mount Design – You might notice the compact form factor that mounts directly on the IGCT package or stack, minimizing stray inductance.
Service-Friendly – Field technicians typically value the clear connectors and labeling, reducing replacement time during planned outages.
Compatibility with ABB IGCT Families – Designed for use alongside ABB medium-voltage IGCT devices and stacks in drives and converters.
| Brand / Model | ABB 5SHX0360D0001 (Order code 3BHL000384P0101) |
| Product Type | IGCT Gate Unit Module (for ABB IGCT stacks) |
| HS Code | 8538.90 (Parts suitable for electrical apparatus; gate unit assembly) |
| Power Requirements | 24 VDC nominal supply for gate unit electronics (typical for ABB IGCT GUs) |
| Signal I/O Types | Fiber-optic trigger/control; status/alarm feedback (implementation may vary by application) |
| Communication Interfaces | Fiber-optic interface commonly used in MV drive stacks; discrete status outputs |
| Operating Temperature | Typically -25°C to +70°C for gate unit electronics (application-dependent) |
| Dimensions & Weight | Compact, direct-mount form factor designed to sit on the IGCT housing/stack |
| Installation Method | Mounted directly on IGCT device/stack; fiber-optic connectors and low-voltage supply wiring |
This gate unit module is typically applied in:
Medium-voltage drives for compressors, pumps, and fans in oil & gas and water treatment
Rolling mills, mining hoists, and heavy-duty conveyors requiring high dynamic performance
Marine propulsion and thruster systems where reliability is critical
Static VAR compensators and high-power converters used in grid/industrial power quality
From my experience, maintaining compatibility across the IGCT stack—device, snubber, and gate unit—pays off with faster commissioning and fewer nuisance trips.
Reliability – ABB’s IGCT ecosystem appears to be designed for long service life and predictable thermal behavior.
Compatibility – Matches ABB IGCT stacks, which typically reduces engineering time and tuning effort.
Lower Lifecycle Cost – Stable supply and like-for-like replacements can cut outage duration and spares complexity.
Technical Support – Documentation and field experience around IGCTs are extensive, which usually shortens troubleshooting.
Mounting – Install the gate unit directly on the IGCT stack as specified by ABB. Observe screw torque and insulation clearances.
Cabinet Environment – Use a clean, dry, ventilated cabinet (IP54 or better in dusty areas). Keep ambient temperature within the specified range.
Wiring & Power – Provide a stable 24 VDC nominal supply and correct fiber-optic connections. Maintain proper grounding and EMC practices.
Cooling – Ensure the heat sink and airflow for the IGCT stack are not obstructed; gate unit electronics should not be exposed to hot airflow directly.
Safety – Lock-out/tag-out before service. Wait for DC link discharge. Use ESD protection when handling the module.
Routine Care – Periodically check connectors, fiber cleanliness, and fasteners. Firmware/configuration (if applicable) should be verified during annual maintenance.
Manufactured under ISO 9001 quality systems
CE compliant for industrial environments (typical for ABB gate units)
RoHS compliant materials
365-day warranty as stated above
If you’re replacing an existing unit, sharing your installed IGCT device type and converter frame size helps confirm perfect fit—this avoids the rare, but costly, mismatch that can happen across revisions.
Send Inquiry to This Supplier
You May Also Like
-
ABB 5SGY3545L0020 IGCT – Press-pack Power Switch for Medium-voltage Drives and ConvertersUS$ 3360.00MOQ: 1 Combo
-
ABB 5SHY3545L0012 IGCT – High-power Press-pack Device for Medium-voltage Converters and Grid ApplicationsUS$ 3360.00MOQ: 1 Combo
-
ABB 5SHY4045L0002 IGCT – High‑power Press‑pack Device for Medium‑voltage Drives and ConvertersUS$ 3360.00MOQ: 1 Combo
-
ABB 5SHX1960L0005 IGCT Gate Unit – Reliable, Fast Switching Control for Medium-voltage Power ConvertersUS$ 3360.00MOQ: 1 Combo
-
ABB 3BHL000386P0101 IGCT Module – High-reliability Press-pack Device for Medium-voltage Drives and Heavy-duty ConvertersUS$ 3360.00MOQ: 1 Combo
-
ABB 3BHL000388P0101 IGCT Module – High‑reliability Power Switching for Medium‑voltage Drives and ConvertersUS$ 12360.00MOQ: 1 Combo
-
ABB IGCT Module 3BHL000389P0101 – High‑reliability Power Switching for Medium‑voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB 3BHL000392R0101 IGCT Module – High‑power Switching Element for Medium‑voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB IGCT Module 3BHB024548R0002 / 5SXE06-0160 – High‑reliability Switching for Medium‑voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB 5SGY3545L0003 IGCT Module – High‑power Press‑pack Switching for Medium‑voltage ConvertersUS$ 2360.00MOQ: 1 Combo
