Contact Platform Support
Help CenterABB UAC389AE01 (HIEE300888R0001) – Industrial Control/Interface Module for ABB Procontrol / Advant Systems
Related Products
-
ABB 5SHX0445D0001 IGCT Module – High-reliability Press-pack Switching for Medium-voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo -
ABB 5SHX10H6010 IGCT Module – Press-pack High-power Switch for Medium-voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB IGCT 3BHL000385P0101 – High‑power Press‑pack IGCT for Medium‑voltage Drives and ConvertersUS$ 6360.00MOQ: 1 Combo
-
ABB 5SHX1060H0002 IGCT Gate Unit – Reliable High-current Drive for Medium-voltage Power ConvertersUS$ 9360.00MOQ: 1 Combo
-
ABB 5SGY3545L0020 IGCT – Press-pack Power Switch for Medium-voltage Drives and ConvertersUS$ 3360.00MOQ: 1 Combo
Warranty: 365 days
Lead time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment, balance in full before delivery
Express options: FedEx, UPS, DHL
Pre‑shipment testing: Functional check and visual inspection, with packing photos on request
System compatibility: Designed for ABB Procontrol racks; commonly applied in Advant Master–based cabinets as a direct replacement.
Backplane integration: Plug-in module interfaces via the system backplane for power and signaling, simplifying wiring changes.
Stable lifecycle support: Suited to plants prioritizing reliability and uptime over platform migrations.
Service-friendly design: Front panel status indicators (varies by revision) make basic diagnostics straightforward for maintenance teams.
Proven in harsh environments: Typically specified for cabinet-mounted operation in industrial temperature ranges when correctly ventilated.
Revision-aware supply: We help match firmware/EPROM revisions so the module aligns with your installed controller set.
| Item | Details |
| Brand / Model | ABB UAC389AE01 (HIEE300888R0001) |
| Function Category | Rack-mounted control/interface module for ABB Procontrol / Advant systems |
| HS Code | 8537.10 (Boards/panels for electric control, rated ≤1000 V) |
| Power Requirements | Supplied via system backplane from the rack PSU (typical) |
| Operating Temperature | Typically 0 to +55 °C when installed in a ventilated control cabinet |
| Signal I/O Types | System bus via backplane; front indicators for status/diagnostics (varies by revision) |
| Communication Interfaces | Backplane interface to controller and system bus (configured per system) |
| Installation Method | Plug-in rack module; secured by front-panel fasteners in ABB system chassis |
Note: Exact electrical and interface details depend on system configuration and revision; we verify against your installed base before shipment.
Plants running ABB Procontrol or Advant DCS platforms—especially where the objective is stable long-term operation—tend to keep UAC389AE01 modules as first-line spares. Typical sectors include:
Power generation (boiler/turbine control, BOP systems)
Oil & gas (compressor stations, refining units)
Chemicals & petrochemicals (continuous process units)
Metals, mining, and cement (line control, utility islands)
Pulp & paper (machine section control, steam/water systems)
One thing I appreciate is how quickly a maintenance team can swap this module during a planned outage. A customer in a combined-cycle plant told us they kept downtime under 40 minutes because the backplane and addressing stayed exactly as before—no field rewiring at all.
Advantages & ValueReliability first: Sourced, inspected, and tested to stabilize legacy control nodes with predictable behavior.
Compatibility: Matches existing racks, addressing, and controller expectations—minimizing engineering changes.
Cost control: Extends the life of installed assets and defers capex-heavy migrations.
Technical support: We assist with part identification, firmware/revision matching, and packaging for safe transit.
Cabinet environment: Install in a clean, ventilated control cabinet. Maintain ambient within typical industrial ranges and avoid heat sources.
Handling: Use ESD protection. Verify module code and AE01 variant before insertion.
Power-down procedure: Isolate power per site safety rules before module replacement unless your site procedure explicitly supports online swap for this slot.
Wiring: The module interfaces via backplane; confirm backplane connector condition and alignment prior to seating the card.
Routine tasks: Periodically check diagnostic LEDs, record any alarms, clean dust filters, and keep firmware/EPROM versions aligned across redundant nodes (where applicable).
Spare policy: In most cases, plants keep at least one tested spare per critical controller bay to reduce MTTR.
Manufacturer standards: ABB manufacturing under ISO 9001 quality systems (typical for the product family).
Compliance: CE for industrial use where applicable; RoHS applicability can vary by production year for legacy modules.
Warranty: 12 months replacement warranty from our side.
Traceability: Serial and revision capture provided on delivery documents; test reports available upon request.
To simplify spares planning, we can also help with matched rack power supplies, Procontrol/Advant backplanes, and commonly paired controller/communication cards in the same family. From a practical standpoint, it seems to be more efficient to verify these together so you don’t uncover a backplane or firmware mismatch during an outage.
Send Inquiry to This Supplier
You May Also Like
-
ABB 5SHY3545L0012 IGCT – High-power Press-pack Device for Medium-voltage Converters and Grid ApplicationsUS$ 3360.00MOQ: 1 Combo
-
ABB 5SHY4045L0002 IGCT – High‑power Press‑pack Device for Medium‑voltage Drives and ConvertersUS$ 3360.00MOQ: 1 Combo
-
ABB 5SHX1960L0005 IGCT Gate Unit – Reliable, Fast Switching Control for Medium-voltage Power ConvertersUS$ 3360.00MOQ: 1 Combo
-
ABB 3BHL000386P0101 IGCT Module – High-reliability Press-pack Device for Medium-voltage Drives and Heavy-duty ConvertersUS$ 3360.00MOQ: 1 Combo
-
ABB 3BHL000388P0101 IGCT Module – High‑reliability Power Switching for Medium‑voltage Drives and ConvertersUS$ 12360.00MOQ: 1 Combo
-
ABB IGCT Module 3BHL000389P0101 – High‑reliability Power Switching for Medium‑voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB 3BHL000392R0101 IGCT Module – High‑power Switching Element for Medium‑voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB IGCT Module 3BHB024548R0002 / 5SXE06-0160 – High‑reliability Switching for Medium‑voltage Drives and ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB 5SGY3545L0003 IGCT Module – High‑power Press‑pack Switching for Medium‑voltage ConvertersUS$ 2360.00MOQ: 1 Combo
-
ABB 5SGY3545L0002 IGCT Power Module – Robust Switching for Medium-voltage Drives and Grid ConvertersUS$ 2360.00MOQ: 1 Combo
