Contact Platform Support
Help CenterHoneywell CC‑IP0101 (51410056‑175) — Ethernet/IP Communication Module for Controller Integration
Related Products
-
Honeywell CC-PUIO31 (51454220-176) — Compact Universal I/O Module for Process ControlNegotiableMOQ: 1 Combo -
Honeywell CC-PCNT02 (51454551-275) — Pulse Counter / Frequency Input Module for Process ControllersNegotiableMOQ: 1 Combo
-
Honeywell CC‑PCF901 51405047‑176 — Process Control Function / I/O ModuleNegotiableMOQ: 1 Combo
-
Honeywell CC-PAIX02 (51405038-476) — I/O & Interface Expansion Module for Control CabinetsNegotiableMOQ: 1 Combo
-
Honeywell CC-PWRR01 51199929-100 — Redundant Power Module for CC ControllersNegotiableMOQ: 1 Combo
The Honeywell CC‑IP0101 (part number 51410056‑175) is presented as an Ethernet communication module designed to add IP connectivity and remote integration to Honeywell CC series controllers. In many cases it’s used to enable BACnet/IP or Modbus TCP links between field controllers and a higher‑level BMS, allowing remote monitoring, firmware updates and centralized alarm/reporting. One thing I appreciate is the compact form factor — it typically fits into standard Honeywell controller expansion slots while keeping wiring straightforward.
Key FeaturesEthernet connectivity — Provides 10/100Base‑T Ethernet interface for system integration and remote access; commonly used to bridge controllers to the plant LAN.
Protocol support (typical) — Often used with BACnet/IP and Modbus TCP in building automation deployments, which simplifies integration with existing BMS platforms.
Diagnostic LEDs and status reporting — Front LEDs for link/activity and module health make on‑site troubleshooting faster; from my experience these are handy during commissioning.
Firmware upgrade capability — Firmware can usually be updated over the network, enabling field fixes and feature additions without controller removal.
Security & access control — Typically supports password protection and can be integrated behind VLANs or firewalls for layered security in enterprise deployments.
Compact, slot or DIN style installation — Designed to occupy minimal controller space, which is useful in retrofit projects where cabinet real estate is limited.
| Brand / Model | Honeywell CC‑IP0101 — 51410056‑175 |
|---|---|
| Function | Ethernet communication module for Honeywell CC controllers (IP connectivity / protocol gateway) |
| Power Requirements | Typically powered by host controller backplane (no separate supply) — verify controller documentation for exact ratings |
| Signal I/O Types | Ethernet RJ‑45 (10/100Base‑T); no analog I/O on the module itself |
| Communication Interfaces | Ethernet (TCP/IP), commonly used for BACnet/IP and Modbus TCP; details depend on controller firmware |
| Dimensions & Weight | Compact module (module/slot form factor). Exact dimensions depend on controller slot — typically lightweight (~100–300 g) |
| Operating Temperature | Typically 0°C to +50°C (verify datasheet for exact limits) |
| Installation Method | Installed into Honeywell CC controller expansion slot or specified carrier; requires cabinet mounting and LAN cabling |
The CC‑IP0101 is typically deployed across building automation and light industrial contexts: HVAC control systems, chiller plants, air handling units, campus BMS integrations, and retrofit modernization projects where IP connectivity is needed without replacing existing controllers. You might notice that it fits particularly well where remote diagnostics and centralized alarm handling are priorities.
Lower integration cost — Adds network capability without swapping out the entire controller, which often saves both hardware and commissioning time.
Field‑proven compatibility — Works with Honeywell CC controller families in many installations; from my experience these modules reduce communication issues when configured correctly.
Faster troubleshooting — Built‑in status indicators and network diagnostics typically reduce mean time to repair.
Reduced downtime risk — Firmware updates and remote access mean fewer truck rolls for minor configuration changes.
Basic installation requires the host controller to be powered down before inserting the module into the designated expansion slot. Install inside a properly ventilated control cabinet (recommended IP20 or better for electronics), maintain at least 50 mm clearance for airflow, and use shielded CAT5e/6 cabling for Ethernet runs when there is significant electrical noise. Grounding and surge protection on the LAN are prudent in industrial sites.
For routine maintenance: check status LEDs during commissioning, keep a record of firmware versions and apply vendor updates as available, backup controller and module configurations, and clean cabinet dust filters periodically. From my experience, keeping firmware and configuration backups makes field service far less stressful.
Honeywell components typically carry industry standard certifications such as CE, RoHS and UL where applicable; the CC‑IP0101 is usually covered by Honeywell’s limited warranty policy (often a 12‑month standard warranty, but verify with your supplier for exact terms). The product also typically benefits from Honeywell technical support and firmware maintenance channels.
If you’re planning a retrofit or an expansion, this module often gives a straightforward path to IP integration. That said, verify the exact firmware compatibility with your specific Honeywell CC controller model and ask for the latest datasheet — small differences in slot wiring or firmware requirements can affect commissioning time.
Simulated customer feedback: "Installed two modules on a campus chiller plant last quarter — commissioning was quick and remote alarms began showing up immediately in our BMS. One thing I appreciated is that we didn't need to replace the controllers."
Send Inquiry to This Supplier
You May Also Like
-
Honeywell CC-PCNT02 + DC-TCNT01 — Compact Pulse Counter and DC Signal Conditioner for Industrial MonitoringNegotiableMOQ: 1 Combo
-
Honeywell CC-PUI001 — Compact Universal Input Module for Building & Process ControlsNegotiableMOQ: 1 Combo
-
Honeywell FC-PSU-UNI2450U — Universal 24V DC Power Supply for Field ControllersNegotiableMOQ: 1 Combo
-
Honeywell FC-TSRO-0824 — Compact I/O & Signal Conditioning Module for Industrial ControlNegotiableMOQ: 1 Combo
-
Honeywell FC-FANWR-24R — 24V Fan Relay Module for Fan Coil ControlNegotiableMOQ: 1 Combo
-
Honeywell FC-TSKUNI-1624 — Universal Temperature Sensor Interface (16–24 V)NegotiableMOQ: 1 Combo
-
Honeywell FC-TSRO-08UNI — 8-Channel Universal Input Temperature & Signal ModuleNegotiableMOQ: 1 Combo
-
Honeywell FC-TSAOH-0220M (CCV 1.0) — Compact Process Control Module for Analog/Digital Signal ConditioningNegotiableMOQ: 1 Combo
-
Honeywell FC-SAO-0220M — Analog Output Module for Industrial Control SystemsNegotiableMOQ: 1 Combo
-
HONEYWELL FX-USI-0002 — Universal Signal Interface Module for Control & I/O IntegrationNegotiableMOQ: 1 Combo
