Contact Platform Support
Help CenterHoneywell FC-PSU-UNI2450U — Universal 24V DC Power Supply for Field Controllers
Related Products
-
Honeywell FC-TSRO-0824 — Compact I/O & Signal Conditioning Module for Industrial ControlNegotiableMOQ: 1 Combo -
Honeywell FC-FANWR-24R — 24V Fan Relay Module for Fan Coil ControlNegotiableMOQ: 1 Combo
-
Honeywell FC-TSKUNI-1624 — Universal Temperature Sensor Interface (16–24 V)NegotiableMOQ: 1 Combo
-
Honeywell FC-TSRO-08UNI — 8-Channel Universal Input Temperature & Signal ModuleNegotiableMOQ: 1 Combo
-
Honeywell FC-TSAOH-0220M (CCV 1.0) — Compact Process Control Module for Analog/Digital Signal ConditioningNegotiableMOQ: 1 Combo
The Honeywell FC-PSU-UNI2450U is a compact universal-input power supply typically used to feed Honeywell field controllers and small I/O racks with 24 VDC. It appears to be designed for reliable 24 V output at around 50 W, making it a practical choice for HVAC panels, access-control power feeds, and distributed control cabinets. From my experience, these modules are chosen when installers want a no-fuss, DIN-friendly power source that just works with common building automation hardware.
Core SummaryCompact, universal AC input (100–240 VAC) power supply delivering a stabilized 24 V DC output (approx. 50 W / ~2.1 A). It’s typically DIN-rail mountable, built to fit inside standard control cabinets, and intended for continuous operation in commercial and light-industrial environments.
Key FeaturesUniversal AC input — Accepts 100–240 VAC 50/60 Hz, which simplifies global sourcing and inventory management.
24 VDC stabilized output — Roughly 50 W (≈2.1 A) continuous; suitable for powering field controllers, low-power I/O, and sensors.
DIN-rail friendly form factor — Fits standard control cabinets and distribution rails for neat panel layouts.
Built for continuous duty — Thermal and overload protections typically included to improve uptime in building automation settings.
Serviceability — Simple wiring and terminal access; in many cases you can swap units quickly during maintenance windows.
| Specification | Details (typical / approximate) |
|---|---|
| Brand / Model | Honeywell FC-PSU-UNI2450U |
| Power Requirements (Input) | 100–240 VAC, 50/60 Hz (universal) |
| Output | 24 V DC, ≈50 W (≈2.1 A continuous) |
| Dimensions & Weight | Typical compact DIN style — approx. 115 × 55 × 90 mm; weight ≈0.4 kg (approximate) |
| Operating Temperature | Typical range: -20 °C to +60 °C (ambient) |
| Signal Input / Output Types | AC mains input; single 24 V DC output. No data/serial communication required (power-only device). |
| Communication Interfaces | None (power supply only) |
| Installation Method | DIN-rail mounting (most common); screw-terminal wiring |
This unit is aimed at building automation and light-industrial uses. Typical deployments include:
HVAC control panels and distributed field controllers
Access control and security system power feeds
Small PLC/remote I/O racks and sensor networks
Equipment cabinets in commercial buildings where stable 24 VDC is required
From a procurement perspective, the FC-PSU-UNI2450U typically scores well for reliability and compatibility. One thing I appreciate is that the universal input reduces the need for multiple SKUs across regions. It seems to be a cost-effective way to standardize power across multiple control panels.
Reliability: Built to run continuously with overload and thermal protection options, lowering field failures.
Compatibility: Produces the industry-standard 24 VDC used by most controllers and sensors.
Reduced inventory complexity: Universal input removes regional variants in many cases.
Serviceability: Simple terminal connections and DIN form factor mean faster replacement during maintenance.
Typical installation is straightforward, but here are practical recommendations I share with customers:
Cabinet standards: Install in a ventilated control cabinet; keep at least 10–20 mm clearance for airflow around the unit.
Ventilation: Avoid placing the supply near heat sources; maintain ambient within the specified temperature range for rated output.
Wiring: Use appropriately sized AC input conductors and secure DC output wiring to prevent voltage drop. Observe polarity on DC terminals.
Safety precautions: Isolate AC mains before service, follow lockout/tagout procedures, and ensure protective earth is connected.
Routine maintenance: Inspect terminals for tightness, check output voltage under load periodically, and keep vents dust-free. There’s typically no firmware to update for a basic PSU.
Honeywell typically supplies power modules to meet common industry standards. Expected certifications and policies:
CE marking (EMC / safety) — typically present
UL recognition or listing for North American installations — commonly available
RoHS compliance for hazardous substances
Manufacturer warranty — typically 12 months (warranty terms may vary by region and purchasing agreement)
In many cases installers report that units like the FC-PSU-UNI2450U “just fit” into their existing control racks and cut down on field rework. One site technician told me it noticeably reduced spare-part types on the truck. Do keep in mind that the dimensions and warranty I list are typical — verify exact datasheet figures for critical projects.
Send Inquiry to This Supplier
You May Also Like
-
Honeywell FC-SAO-0220M — Analog Output Module for Industrial Control SystemsNegotiableMOQ: 1 Combo
-
HONEYWELL FX-USI-0002 — Universal Signal Interface Module for Control & I/O IntegrationNegotiableMOQ: 1 Combo
-
HONEYWELL FC-PSU-240516 – Industrial 24 VDC Power Supply for FC-series Controllers and I/ONegotiableMOQ: 1 Combo
-
HONEYWELL FC-SAI-1620m – Safety-Grade 16-Channel Analog Input for Process ControlNegotiableMOQ: 1 Combo
-
HONEYWELL CC-PDIS01 – Pulse/Discrete Input Module for Experion Series C and C300 I/ONegotiableMOQ: 1 Combo
-
HONEYWELL FC-SDO-0824 – 8‑Channel 24 VDC Digital Output Module for Discrete ActuationNegotiableMOQ: 1 Combo
-
HONEYWELL FC-IO-0001 – Flexible I/O Interface Module for Reliable Plant ControlNegotiableMOQ: 1 Combo
-
HONEYWELL FC-IO-0002 Field I/O Module – Practical Expansion for Honeywell-based Control PanelsNegotiableMOQ: 1 Combo
-
HONEYWELL MTL4850 – HART Multiplexer for Smart Instrument Access and Asset ManagementNegotiableMOQ: 1 Combo
-
HONEYWELL FC-SDI-1624 – 16‑Channel 24 VDC Sinking Digital Input Module for Industrial PLC/SCADA I/ONegotiableMOQ: 1 Combo
