Contact Platform Support
Help CenterABB 1MRB150020R0712 – OEM Bearing Component for ABB Large AC Motors
Related Products
-
ABB 1MRB150020R1102 – OEM Interface/Feedback Board for ABB Drive SystemsNegotiableMOQ: 1 Combo -
ABB 1MRB150021R0116 – Motor Feedback Unit for Precise Speed/Position ControlNegotiableMOQ: 1 Combo
-
ABB 1MRB150022 R0002Y – OEM Control/feedback Module for ABB Drive and Motor SystemsNegotiableMOQ: 1 Combo
-
ABB 1MRB150051R1 – Genuine Motor Bearing (Factory‑coded Spare for ABB Motors)NegotiableMOQ: 1 Combo
-
ABB 1MRB178009R0001 – OEM Spare Module for Motor/Drive Feedback and Assembly ReplacementNegotiableMOQ: 1 Combo
The ABB 1MRB150020R0712 is a genuine factory spare from ABB’s 1MRB series, typically supplied as a bearing component for specific large-frame ABB motors. It’s designed to match the original motor BOM, so fit and running clearances line up without rework. From my experience, this is exactly the kind of part you want on hand for planned overhauls or fast-turn emergency repairs.
Genuine ABB spare – Traceable to ABB documentation and motor serial/BOM for a clean drop-in replacement.
Precision fit – Machined to the original running tolerances to maintain shaft alignment and vibration performance.
Typically sleeve-bearing spec – In many cases supplied as a white-metal (babbitt) lined bearing component compatible with oil-bath lubrication.
Service-friendly design – Supports standard inspection routines: oil checks, temperature trending, and visual wear assessment.
Compatibility-minded – Usually interfaces with ABB standard seals, oil rings, and (where fitted) RTD pockets on the housing.
Reliability focus – The correct OEM bearing geometry helps preserve rotor dynamics and reduces unplanned stops.
| Brand / Model | ABB / 1MRB150020R0712 |
| Product Type | OEM bearing component (fits designated ABB large-frame motors) |
| Power Requirements | Not applicable (mechanical spare part) |
| Dimensions & Weight | Model-specific; tied to motor frame size and BOM (confirm by motor serial) |
| Operating Temperature | Typically -20°C to +100°C for bearing environments, subject to motor lubrication spec |
| Signal I/O Types | Not applicable; may interface with temperature sensors in the housing (where equipped) |
| Communication Interfaces | Not applicable |
| Installation Method | Drop-in replacement per ABB service manual; align to specified clearances and lubrication scheme |
You’ll typically find the 1MRB150020R0712 used in heavy-duty ABB motors driving pumps, compressors, large fans, refiners, and generators. It seems to be a common fit in process industries where continuous duty is the norm—steel, pulp & paper, chemical/petrochemical, power plants, marine, and large HVAC.
High-power AC induction and synchronous motors
HV motors with oil-lubricated sleeve bearing arrangements
Long-run applications with tight vibration limits and uptime targets
Reliability – OEM geometry and materials help maintain film thickness and reduce wear, especially under high radial loads.
Compatibility – Matches ABB endshield/pedestal designs, seal interfaces, and oil ring layouts—no guessing on dimensions.
Cost Control – Using the correct bearing component can prevent secondary damage to shaft journals and housings.
Support – Easy to cross-check against your motor serial; documentation and service guidance are straightforward.
A maintenance supervisor at a paper mill told me they swapped in this ABB bearing component during a weekend outage—startup temperatures stabilized quickly, and vibration returned to baseline without shimming. That’s usually a good sign the clearances were right the first time.
Environment – Install in a clean, dry area; motor control cabinets and bearing housings should allow ventilation and access for oil checks.
Fit-up – Verify housing and shaft journal condition; check radial/axial clearances against ABB’s service limits before final assembly.
Lubrication – Use the oil grade specified by ABB (often ISO VG 68 or as per the motor plate). Confirm oil ring height and free rotation.
Alignment – After fitment, perform shaft alignment and soft-foot checks; monitor runout and temperature on first startup.
Safety – Lockout/tagout, hot-surface precautions, and sling/hoist rated for the component weight are essentials.
Routine care – Periodic oil analysis, bearing temperature trending, and visual inspection for scoring or discoloration. Replace seals if leakage appears.
Manufactured under ISO 9001 quality systems
Material compliance typically meets RoHS for component-level supply
Component-level CE/UL marking is not generally applicable; conformity sits at the motor/equipment level
Standard manufacturer warranty: 12 months from delivery (when installed and operated per ABB guidelines)
Quick note: matching by motor serial and order code is the fastest way to confirm the 1MRB150020R0712 is the correct DE/ND item and clearance class. If you share that info, we can verify compatibility and lead time before you schedule the outage.
Send Inquiry to This Supplier
You May Also Like
-
ABB 1MRK001967-AA – Field Accessory for Relion Protection & Control IED CommissioningNegotiableMOQ: 1 Combo
-
ABB 1SVR011700R0000 – Compact Control/Monitoring Relay for Reliable Panel AutomationNegotiableMOQ: 1 Combo
-
ABB 1MRK002133-ABr02 – Hardware Module for Relion Protection IEDsNegotiableMOQ: 1 Combo
-
ABB 1SFB536068D1011 – Industrial Contactor for Dependable Motor and Power SwitchingNegotiableMOQ: 1 Combo
-
ABB 1SVR011718R2500 – Compact Electronic Monitoring Relay for Reliable Automation ControlNegotiableMOQ: 1 Combo
-
ABB 1SVR040000R1700 – Compact DIN‑rail Control Relay for Reliable Panel Monitoring and Signal SwitchingNegotiableMOQ: 1 Combo
-
ABB 1TGE120021R0110 – CP600-Pro HMI Operator Panel for Reliable Machine InterfacesNegotiableMOQ: 1 Combo
-
ABB 216MB66 (HESG324510M1) – Industrial Control Board for Rack-Based DCS/Drive PlatformsNegotiableMOQ: 1 Combo
-
ABB 3ASC25H219B / DATX133 – Versatile I/O Module for Stable, Long‑life Process ControlNegotiableMOQ: 1 Combo
-
ABB 3BDH000741R1 CTI21-P – Pulse/Encoder Input Interface for ABB Control SystemsNegotiableMOQ: 1 Combo
