ASTM A213 Tp316L Stainless Steel Seamless Tube Pipe Price

ASTM a213 Tp316L is a grade belonging to heat exchanger or high-pressure tubes that are designed with 316L austenitic stainless steel. The ASTM A213 TP316L Tube is manufactured with a superior chemical composition of nickel, chromium, and molybdenum. The content allows these modules to work in highly corrosive and oxidative media. The low-carbon ASTM A213 SS 316L Tube is also seen in environments where pitting and crevice corrosion are easily induced on the material. These tubes are designed in thickness between 0.40mm up to 12.70mm. The robust 316L tubes can be processed in a hot or cold drawing process. ASTM A213 TP316L Cold Drawn Tube is processed at room temperatures allowing the modules to have enhanced surface finish and outstanding strength. Our illustrious institute has tie-ups with some of the best logistical systems in the country, allowing us to transport products efficiently to your doorstep.

The components in the ASTM a213Tp316L grade are produced in seamless, welded, or erw configurations. The SA213 Tp316L Seamless Tubes are manufactured via the extrusion process. Here hot steel billets are passed through the metal to precisely shape them in the correct dimensions. Designed without welds or seam, the ASTM A213 UNS S316l00 Seamless Tube has outstanding strength and 20% higher load-bearing capacity when compared to welded tubes. These tubes are designed in size between 1/2 OD up to 12 OD and are available in lengths of single, double random, and cut sizes. The material utilized in producing the AISI 316L Seamless Tubing makes them a little more expensive than welded pipes. They, however, are very much preferred in harsh applications across stress-induced setups. The AISI 316L ERW Tubing is manufactured as a high-voltage current is passed through the metal to longitudinally weld it in place without the need for any filler material. For more information or any queries, visit any of our outlets or contact us.

Product Name	Seamless Stainless Steel Pipes /Tubes
Company Inform	1.Name:ZHEJIANG ZHONGZHENG STAINLESS STEEL., LTD   2.Type: Manufacturer
Material	Austenitic: TP304, TP304L, TP304H, TP309S, TP310S, TP316L, TP316Ti, TP317L, TP321, TP321H, TP347H , 904L, 254SMO GOST Grade: 08х18н10т,12х18н10т(AISI 321), 10х17н13м2т(AISI 316Ti), , 20х23н18(AISI 310S), 06хн28мдт(AISI 904L), 08х18н10(AISI304) EN Grade: 1.4301,1.4306,1.4311,1.4541,1.4401,1.4404,1.4550,1.4571,1.4429,1.4435,1.4436,1.4439
	Duplex Stainless: UNS S31803,UNS S2205,UNS S32750, UNS S32760
	Nickel Alloy: Incoloy: 800/800H/800HT 825 926 20 28 201 200 Inconel :718 600 601 625 Hastelloy: C-22 C-276 B-2 B-3 GH3030 GH3039 Cr20Ni80 ; Monel400,K-500
Standard	ASTM A312,ASTM A213,ASTM A269,ASTM A511,ASTM A789,ASTM A790 EN 10216-5,DIN 17456 GB/T 14976,GB13296,GB/T21833 GOST 9940,GOST 9941
Specification	D(Outer Diameter)	6mm-630mm ; 1/8inch-24inch
	T(Wall Thickness)	1mm-40mm ;  SCH5S, SCH10S, SCH40S, SCH80S, SCH160, SCHXXS
	L(Length)	Random length 5~7m Fixed length 6m /6.096m /6.1m/12m  or as customer's actual request
Surface	Annealing&Pickling Polishing(180#-600#) Bright Annealing Sand Blasting Shot Blasting
Pipe end	Plain Ends (PE) Bevelled Ends (BW) Threaded Ends (TE)
Markings	Markings will adhere to prescribed specifications in A999/A999M and shall include the NPS or OD and schedule number or average wall thickness, heat number, and NH (when hydrotesting is not performed) and ET (when eddy-current testing is performed) or UT (when ultrasonic testing is performed). The marking shall also include the manufacturer's private identifying mark, the marking requirement of section 12.3 on Hydrostatic or Nondestructive Electric Test, if applicable, and whether seamless (SML), welded (WLD), or heavily cold-worked (HCW). For Grades TP304H, TP316H, TP321H & TP347H, the marking shall also include the heat number and heat-treatment lot identification.
Flattening Test	For material heat treated in a continuous furnace flattening tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 lengths of pipe.
Hydrostatic or Nondestructive Testing	Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test
Delivery Time	For ready stock :7 days after receiving the deposit of T/T For MTO: 35 days after receiving the  deposit of T/T
Trade Terms	EXW,FOB, CFR, CIF etc.
Loading Port	Ningbo/Wenzhou/Shanghai
Remittance method	TT/LC/CASH
Container	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM  40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM
Referenced Documents	ASTM Referenced Standards A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels A370 Test Methods and Definitions for Mechanical Testing of Steel Products A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys A999/A999M Specification for General Requirements for Alloy and Stainless-Steel Pipes A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless-Steel Tubes E112 Test Methods for Determining Average Grain Size E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)