Home > Construction & Decoration > Waterproof Building Materials > Asphalt Waterproof Membrane > Factory Supply ROAD SURFACE CRACK SEALING TAPES

Factory Supply ROAD SURFACE CRACK SEALING TAPES

Factory Supply ROAD SURFACE CRACK SEALING TAPES photo-1
Factory Supply ROAD SURFACE CRACK SEALING TAPES photo-2
Factory Supply ROAD SURFACE CRACK SEALING TAPES photo-3
Factory Supply ROAD SURFACE CRACK SEALING TAPES photo-4
Factory Supply ROAD SURFACE CRACK SEALING TAPES photo-5
US$ 0.65 ≥10000 Meters
Key Specifications
Get Latest Price
Transport Package:
cartons
Specification:
5cm
Trademark:
Hongzhan
Payment & Shipping
Payment Methods:
Port of Shipment:
Qingdao China
Delivery Detail:
15 days
Transport Package cartons
Specification 5cm
Trademark Hongzhan
ROAD SURFACE CRACK SEALING TAPE

1: Product introduction
The adhesive seam strip is the composite material specially designed for road crack treatment developed and produced by our company independently. It has many advantages, such as good adhesion, strong tensile strength, strong watertightness, good durability and low price, simple construction, etc

912xzSxEStL81Osdnp5n+L   

Ii. Usage of the product
It is suitable for the treatment of various cracks of cement, asphalt pavement and well cover, and can also be used for the treatment of cracks before construction such as sealing surface and lap joint.


Iii. Construction technology
1. According to the width of the pavement crack, the specifications of the tape used are usually 3cm, 4cm, 5cm and 8cm.
2. The cracks shall be cleaned without large protrusions, depressions, loose stones, oil stains or grease.
3. Keep the surface of cracks clean and dry, and it is recommended to fill cracks with width or depth greater than 1cm;
4. Remove the isolation paper on the back of the adhesive tape and stick the tape on the road flat with the crack as the center line. In case of irregular cracks, according to the direction of the crack tracking paste, no need to use a paper knife or scissors to cut the tape.
5. During the construction of the adhesive tape, it is advisable to tread lightly on the surface of the adhesive tape with flat shoes to strengthen the adhesive strength between the adhesive tape and the original road surface.
6. Traffic can be opened after the construction of adhesive tape is completed.

 

Iv. Product advantages
1, convenient construction, high efficiency: no need for any machine, construction efficiency is more than 10 times of the irrigation joints;
2. High cost performance: the cost is about 80% of the construction cost of the same performance;
3. Strong bonding ability: it can be closely bonded with the road surface;
4. Reliable technology: no water seepage, no flow at high temperature, no stick wheel, no brittle crack at low temperature, good durability, no damage to the pavement structure;
5. Strong applicability: it can be used for crack treatment of cement pavement and asphalt pavement, and also for crack treatment in front of old road mask;
6. Energy conservation and environmental protection: no fuel consumption, no exhaust emission;


Product Tags: crack sealing tape , bitumen tapes , tape

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Verified Business License
Business Type
Trading Company
Year Established
2021
Annual Export Value
Below US$1 Million
Port of Shipment
Qingdao, Tianjin

Recommended Categories

Explore top categories and find suppliers for your specific needs