Contact Platform Support
Help CenterOne Component SPU Adhesive
Related Products
-
Epoxy Structural AdhesiveNegotiableMOQ: 100 Boxes -
Two-component Encapsulating System Based on EpoxyNegotiableMOQ: 100 Boxes
-
Two-component Encapsulating System Based on Polyurethane.NegotiableMOQ: 100 Boxes
-
QLD False Eyelash Glue Self-Extension, Non-Irritating, Ultra-Sticky, Long-lasting, Natural and Clear Eyelash GlueUS$ 2.4 - 3.2MOQ: 1000 Cases
-
Two-component Encapsulating System Based on Polyurethane.US$ 12 - 68MOQ: 10 Pairs
One Component SPU Adhesive
l One-component, solvent-free, low-odor, room-temperature moisture-curing, non-black water.
l The façade is glued without flowing, oil-resistant, water-resistant, salt-spray-resistant, age-resistant, vibration-resistant and fatigue-resistant.
l No primer, fast curing speed, easy construction, good paintability. It has high adhesion strength to a variety of materials such as glass, metal, and lacquer.
Product Details
QLD463 polyurethane windshield adhesive
High modulus, ultra-high strength for windshield bonding, which can achieve the expected stress in a short time.
QLD464 polyurethane windshield adhesive
High strength and high elasticity for direct assembly of automotive windshields.
QLD465 polyurethane glass structural adhesive
High strength and high elasticity, suitable for the assembly and maintenance of automobile windshields.
QLD466 Polyurethane Caulk Sealant
High adhesion and strong caulking ability. It is widely used in welding and seam sealing of vehicles, machinery and equipment, cold storage, containers, etc.
Product performance and packaging specifications
Product model |
QLD463 |
QLD464 |
QLD465 |
QLD466 |
Exterior color |
Black paste |
Black paste |
Black paste |
Black/white paste |
Density (g/cm3) |
1.15±0.1 |
1.25±0.1 |
1.35±0.1 |
1.45±0.1 |
Surface drying time (min) |
15~30 |
15~30 |
15-40 |
15~60 |
Cure rate (mm/24h) |
2~3 |
2~3 |
2~3 |
2~3 |
Tensile strength (MPa) |
8 |
6 |
3 |
2 |
Elongation (%) |
500 |
400 |
400 |
300 |
Shear strength (MPa) |
6 |
4 |
3 |
2 |
Tear strength (kN/m) |
10 |
8 |
7 |
6 |
Shore hardness (shore A) |
50~70 |
45~65 |
35~55 |
30~50 |
Operating temperature (℃) |
-40-120 |
-40-120 |
-40-120 |
-40-120 |
Packing specifications |
300ml/tube, 25 tubes/carton; 400/600ml/piece, 28/20pcs/carton; 55 gallon pail (250kg) |
|||
Operational process
1. Remove the dust, oil and moisture on the gluing surface, and brush the activated cleaning agent on the gluing surface.
2. Pierce the nozzle of the rubber tube, install the nozzle, cut the nozzle into a suitable inclined plane, and load the glue gun.
3. Apply the glue evenly on the sizing surface, close the assembly, and scrape the overflowing glue.
Precautions
1. Suggested construction conditions: temperature 5~40℃, relative humidity 65~75%.
2. Sealed storage in a cool and dry place, and the storage period is 6 months.
Send Inquiry to This Supplier
You May Also Like
-
Addition Molding Silicone SealantUS$ 16 - 68MOQ: 10 Pairs
-
One-part Silicone Potting Compoundone-part Silicone Potting CompoundUS$ 8 - 39MOQ: 100 Sets
-
Semi-Fluid Silicone SealantUS$ 8 - 20MOQ: 100 Sets
-
Non-flowing Silicone SealantUS$ 8 - 12MOQ: 100 Sets
-
Silicone Thermal Conductive AdhesiveUS$ 8 - 12MOQ: 100 Sets
-
Silicone Thermal Conductive AdhesiveUS$ 8 - 12MOQ: 100 Sets
-
Encapsulation and Sealing of Electronic ComponentsUS$ 16 - 35MOQ: 100 Sets
-
Two-component Encapsulating System Based on EpoxyUS$ 10 - 17MOQ: 10 Sets
-
Toughened Fast-curing Epoxy AdhesiveUS$ 17 - 27MOQ: 100 Sets
-
One-component Encapsulating System Based on Epoxy ResinUS$ 80 - 100MOQ: 10 Sets
