Contact Platform Support
Help CenterNon-flowing Silicone Sealant
Related Products
-
Silicone Thermal Conductive AdhesiveUS$ 8 - 12MOQ: 100 Sets -
Silicone Thermal Conductive AdhesiveUS$ 8 - 12MOQ: 100 Sets
-
Encapsulation and Sealing of Electronic ComponentsUS$ 16 - 35MOQ: 100 Sets
-
Two-component Encapsulating System Based on Polyurethane.US$ 12 - 68MOQ: 10 Pairs
-
Addition Molding Silicone SealantUS$ 16 - 68MOQ: 10 Pairs
Non-flow silicone sealant is a class of one-component room temperature curing neutral silicone materials with high and low temperature resistance, excellent aging resistance, flexibility, insulation, moisture, shock, corona resistance, and resistance to leakage. The surface does not flow, can be bonded to steel, glass, PVC, ABS and other materials. Suitable for electronic components and other types of adhesive sealing.
593 Silicone Rubber Sealant
Deoxime type, black color, suitable for sealing and bonding of all kinds of electronic components.
594 Silicone Rubber Sealant
Deoxime type, transparent, suitable for moisture-proof adhesive sealing of circuit boards etc. with transparent requirements.
595 Silicone Rubber Sealant
Deoxime type, white color, suitable for moisture-proof adhesive sealing of refrigerators, solar modules, electronic components and so on.
583 Silicone Rubber Sealant
Dehydrated, various colors, non-corrosive to polycarbonate (PC), copper and other materials, suitable for all kinds of electronic components sealing bonding.
Performance indicators
Non-flowing silicone sealant | ||||
Performance indicators |
QLD593 |
QLD594 |
QLD595 |
QLD583 |
Appearances |
Black |
Transparent |
White |
By choice |
Densities（g/cm3） |
1.1~1.4 |
0.9~1.1 |
1.1~1.4 |
1.1~1.4 |
Surface drying time（min） |
10~30 |
10~30 |
10~30 |
5~15 |
Tensile strength（MPa） |
1.0~2.0 |
1.0~2.0 |
1.0~2.0 |
1.0~2.0 |
Elongation（%） |
300~500 |
200~350 |
300~500 |
200~300 |
Hardness（shore A） |
30~50 |
20~30 |
30~50 |
25~35 |
Shearing strength（MPa） |
1.0~2.0 |
1.0~2.0 |
1.0~2.0 |
1.0~2.0 |
Dielectric strength（kv/mm） |
20 |
20 |
20 |
20 |
Loss factor（1.2MHz） |
0.001 |
0.001 |
0.001 |
0.001 |
Volume resistance（Ω·cm, 25℃） |
2.0×1014 |
|||
Working temperature range（℃） |
-60~250 |
-60~250 |
-60~250 |
-60~250 |
Wire shrinkage（%） |
0.3 |
0.3 |
0.3 |
0.3 |
Thermal conductivity（W/M·K） |
0.3 |
0.3 |
0.3 |
0.3 |
Operation process
1. Clean the surface: The surface of the object to be adhered to clean, remove rust, dust, moisture and oil.
2. Glue application: Cut the glue nozzle, put it into the glue gun, and squeeze the glue into the surface that has been cleaned up, so it is evenly distributed.
3. Adhesive sealing: 20 minutes after the glue application must be bonded, the adhesive surface will be fixed together.
4. Curing: room temperature curing for 24 hours to reach the highest strength.
Higher temperature in summer, curing will be faster; lower temperature in winter, curing will be slower.
Notes
Silicone rubber absorbs moisture and cures, unused rubber should be sealed and stored. Sealed storage in a cool dry place, storage period of 9 months.
Send Inquiry to This Supplier
You May Also Like
-
One-part Silicone Potting Compoundone-part Silicone Potting CompoundUS$ 8 - 39MOQ: 100 Sets
-
Semi-Fluid Silicone SealantUS$ 8 - 20MOQ: 100 Sets
-
Two-component Encapsulating System Based on EpoxyUS$ 10 - 17MOQ: 10 Sets
-
Toughened Fast-curing Epoxy AdhesiveUS$ 17 - 27MOQ: 100 Sets
-
One-component Encapsulating System Based on Epoxy ResinUS$ 80 - 100MOQ: 10 Sets
-
Single Component Epoxy Bonding AdhesiveUS$ 22 - 30MOQ: 10 Sets
-
Single Component Epoxy Structural AdhesiveUS$ 12 - 15MOQ: 10 Sets
-
Two-component Encapsulating System Based on PolyurethaneUS$ 14 - 18MOQ: 10 Sets
-
Modified Silicone AdhesivesUS$ 15 - 20MOQ: 10 Sets
-
Low Modulus Silane SealantUS$ 15 - 20MOQ: 10 Sets
