Contact Platform Support
Help CenterHot Metal Detector MD85100
Related Products
-
Industrial Hot Metal Detector Used in Rod MillNegotiableMOQ: 1 Set -
High Temperature Hot Metal Detector MSE-HMD85NegotiableMOQ: 1 Set
-
Anti-Mist Hot Metal Detector With Water CoolingNegotiableMOQ: 1 Set
-
Quick Response Hot Metal Detector With High QualityNegotiableMOQ: 1 Set
-
MSE Remote Control Hot Metal Detector With Air PurgeNegotiableMOQ: 1 Set
Hot Metal Detector for Product Detection
Rear Bar Display
The rear bar display allows the user to clearly establish the amount of received IR both from the background metalwork and the bar being detected and thereby establishing the correct trip level required. This display also allows the user to align the Detector from a low energy source such as a flashlight, which normally would be insufficient to switch the Detector. Adjustment of both the threshold and the response time is also clearly defined by this bar.
Housing Specifications
Housing: Aluminum AL6, Oven baked blue paint
Housing Rating: IEC IP66, DIN, 89011
Weight w/o Cable: 1.9 Kg (4.2lb)
Connector: IP66 with connected Plug/Socket
Cable Length: 1.5 M Standard up to 15 M available
Cooling: Air Cooled & Air Purged or Water Cooled & Air Purged
Air & Water Specifications
Air Pressure: 1 cu ft./min at 5 PSI for normal conditions
5 cu ft./min at 15 PSI for severe conditions
Water Pressure: 5 to 10 PSI, 40 PSI Maximum
Water Volume: Regulate between 0.2 - 0.3 liters/min.
Water Temp.:
For Ambient Temperature up to 70°C use ambient water below 20°C
For Ambient Temperature up to 80°C use water chilled up to 10°C
General Specification
|
Lens F.O.V. (Filed of View) |
0.5° x 25° Rectangular Slit |
|
Min/Max I.R. Threshold Settings |
Adjustable from 270°C via Programming Switch |
Response Time |
1 ms to 250 ms, via Programming Switch |
Supply Voltage |
Standard: 80 - 240 VAC, 50/60 or 24 VDC ± 10% |
Power Consumption |
5 W |
Operating Temperature |
1. -20°C to +50°C without Air Cooling 4. up to 80°C with Heat Shield |
Output (#1) |
Cradle Relay Output, SPNO, 240 VAC, 7A with 20 ms Response Time. |
Output (#2) |
Reed Relay Output, (OPTION) SPNO, 240 VAC, 0.5A with 2 ms Response Time. |
Output (#3 & #4) |
NPN and PNP Outputs, N.O., 500 mA, 45 VDC, 2A Peak. |
Contact us
If You are interested in cooperation or need some more information, please contact us.
Moduloc System Engineering Co., Ltd. (Yantai) | |
Jerry Liu | |
Telephone: |
86-0535-2161086 |
Mobile Phone: |
150 9850 7080 |
Skype: |
lxw-mse |
Website: |
|
http://mse-system.en.china.cn | |
Send Inquiry to This Supplier
You May Also Like
-
Germany- Quality Hot Metal Detector Used in Steel MillNegotiableMOQ: 1 Set
-
MSE-HMD85 Detect Hot Metal Used in Plate MillNegotiableMOQ: 1 Set
-
Germany Quality HMD With CE CertificationNegotiableMOQ: 1 Set
-
Laser Detection Tools Used in Roughing MillNegotiableMOQ: 1 Set
-
Best Seller Hot Metal Detector Used for Steel MillNegotiableMOQ: 1 Set
-
MSE Hot Metal Detector for Detection PositioningNegotiableMOQ: 1 Set
-
Photoelectric Sensor Used to Detect Hot MetalNegotiableMOQ: 1 Set
-
MSE-HMD85 Metal Detecting Device Installed in Rod MillNegotiableMOQ: 1 Set
-
Industry Hot Metal Detection Sensor for Billet InspectionNegotiableMOQ: 1 Set
-
Best Hot Metal Inspection Device for Optimum CuttingNegotiableMOQ: 1 Set
