Contact Platform Support
Help Center
Related Products
-
IEC 60335-2-3 Clause 22.105 Cordless Kettle Withdrawn Life Test EquipmentUS$ 3000 - 8000MOQ: 1 Set -
IEC 60335-2-23 Clause 3.1.9 Test Device for Testing Helmet-Type HairdryersUS$ 800 - 2000MOQ: 1 Set
-
IEC 60598.1 Annex D Draught-proof EnclosureUS$ 3000 - 8000MOQ: 1 Set
-
IEC 62368-1-2018 Clause 8.8 Handle Strength Test ApparatusUS$ 2000 - 8000MOQ: 1 Set
-
IEC60335-2-17 Clause 21.111.1 Heating Elements and Internal Wiring Flexing Test EquipmentUS$ 2000 - 8000MOQ: 1 Set
Cord Anchorage Pull Force and Torque Tester
1. Description
The cord anchorage pull force and torque tester is designed according to the standards of IEC60598, IEC60335-1 clause 25.15, IEC60884-1 clause 23.2, GB7000, GB2486 and etc., It is used to test tension and torque on the terminals of appliances provided with a supply cord and household appliances intended to be permanently connected to fixed wiring with flexible cords, it shall not be possible to push the cord into the appliance to such an extent that the cord or internal parts of the appliance could be damaged.
The test method is to make a mark on the cord at a distance of approximately 20mm from the cord anchorage or other suitable point, and then apply steady pull force to cord for 25 times with a speed of 1 times/s. Then apply a torque as close as possible to the appliance for 1 minute. After the test, the displacement of the cord marking position shall not exceed 2 mm.
2. Parameter
Working Power | AC 220V/50Hz |
Pull force weight | 20N*2, 30N*2 (can realize 30N, 60N, 80N and 100N pull forces) |
Torque weight | 5 (can realize 0.1Nm, 0.15Nm, 0.25Nm, 0.35Nm, 0.425Nm torque) |
Test times | 0~9999 presetable, default 25 times |
Test speed | 1 times/s |
Torque time | 0.01s~99H99M |
Pull force and torque Table (IEC60335-1)
Mass of Appliance (KG) | Pull force (N) | Torque (N.m) |
≤1 | 30 | 0.1 |
>1 and ≤4 | 60 | 0.25 |
>4 | 100 | 0.35 |
2. Torque Test Values for Cord Anchorages (table 18 IEC60884-1)
Rating of plug or portable socket-outlet | Flexible cable (number of cores x nominal cross-sectional area in mm2) | ||||
2x0.5 | 2x0.75 | 3x0.5 | 3x0.75 | (2 or more)x1 | |
Up to and including 16A and 250V | 0.10Nm | 0.15Nm | 0.15Nm | 0.25Nm | 0.25Nm |
16A -and above 250V | - | - | - | - | 0.35Nm |
Above 16A | - | - | - | - | 0.425Nm |
Send Inquiry to This Supplier
You May Also Like
-
IEC 60335-2-2 Clause 21.103 Current-Carrying Hose Flexing Test ApparatusUS$ 2000 - 8000MOQ: 1 Set
-
IEC 62560 Bending Moment Test Device for Testing LampUS$ 2000 - 8000MOQ: 1 Set
-
IEC 60335-2-17 Blankets Mechanical Strength Test ApparatusUS$ 2000 - 8000MOQ: 1 Set
-
IEC 60811 Cable Sheaths Indentation Testing DeviceUS$ 1000 - 8000MOQ: 1 Set
-
IEC 60335-2-2 Current-Carry Hoses Abrasion Test ApparatusUS$ 2000 - 8000MOQ: 1 Set
-
IEC 62368-1 Handle Strength Test ApparatusUS$ 3000 - 8000MOQ: 1 Set
-
IEC 60950 High Current ARC Ignition Test ApparatusUS$ 2000 - 8000MOQ: 1 Set
-
IEC 60598-1 Tumbling Barrel Testing MachineUS$ 2000 - 8000MOQ: 1 Set
-
IEC 60598-2-20 Lab Equipment Lighting Chains Pressure Test DeviceUS$ 800 - 2000MOQ: 1 Set
-
IEC 60601-1 Lab Testing Machine Residual Voltage Tester With 250V Output VoltageUS$ 800 - 2000MOQ: 1 Set
