Contact Platform Support
Help CenterIEC 6068-2-75 IK01 to IK11 Pendulum Impact Hammer Testing Machine With 2J to 50J Impact Hammer
Related Products
-
IK01 to IK06 Pendulum Impact Test Apparatus for Plug Socket-outlet and CouplerUS$ 1500 - 5000MOQ: 1 Set -
IEC 60068-2-75 Spring Impact Hammer for IK01-06 Impact TestUS$ 250 - 1500MOQ: 1 Piece
-
IK07 Single Spring Hammer for 2J Impact TestingUS$ 250 - 1500MOQ: 1 Piece
-
IEC 60068-2-75 Affordable IK07-11 Manual Release Vertical Impact HammersUS$ 200 - 3000MOQ: 1 Piece
-
IEC 60068-2-75 62262 IK07-IK10 Striking Elements for 2J, 5J, 10J and 20JUS$ 200 - 2000MOQ: 1 Piece
1. Introduction
The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS EN 50102:1995 and amended in 1998, following its adoption as an international standard (IEC 62262) in 2002, the European standard was renumbered EN 62262. The IK code is from 00 to 10, and corresponding impact energy is from 0.14J to 20J.
This equipment can perform IK01 to IK10 tests, the swing pipe can be adjusted back and forward, left and right, and the angle also can be adjusted. The hammer for 1J and below tests is made of nylon, and the hammers for IK07 to IK10 tests are made by steel, the working principle is : the sample is placed in normal, then adjust the impact points, and position the impact device, then release the hammer to freely impact the hammer. The impact angle and impact height are adjustable.
For low energy tests (≤1J, IK01 to IK06), there will be a mounting fixture to fix the specimens as per IEC60068-2-75 clause 4.2.2, the mounting fixture is designed according to IE60068-2-75 figure D.3, and applied to fixed the specimens like switches, lampholders, covers, screw glands, plug, sockets and etc..
The test rig is made of aluminum alloy, with four wheels at the bottom, and the whole device can move freely.
2. Parameter
Swing Pipe |
Steel pipe 1 (Length: 1000mm, outer diameter: 15.9mm, thickness: 1.5mm) for energies exceeding 2J Steel pipe 2 (Length: 1000mm, outer diameter: 9.0mm, thickness: 0.5mm) for energies not exceeding 2J |
Impact angle |
0~900 |
Lifting stroke |
200-1200mm |
Impact hammers |
Striking elements: ≤1J for IK01 to IK06 tests, made by nylon Striking elements: 2J for IK07 test, 5J for IK08 test, 10J for IK09 test, 20J for IK10 test, made by steel, |
Equivalent mass of hammers |
≤1J: 0.2KG, IK07: 0.5KG, IK08: 1.7KG, IK09: 5KG, IK10: 5KG, IK11: 10KG |
Hammer release method |
Manual release |
Mounting Fixtures |
1). Completed designed according to IEC60068-2-75 figure D.3, applied for IK01 to IK06 tests 2). Flat mounting plate for IK07 to IK10 tests, adjustable angle 0-90°, equipped with M6 screw holes |
Characteristics 0f Striking Elements | ||||||||
Energy/J |
≤1 ±10% |
2 ±5% |
5 ±5% |
10 ±5% |
20 ±5% |
50 ±5% |
||
Equivalent mass±2%kg |
0.25(0.2) |
0.5 |
1.7 |
5 |
5 |
10 |
||
Material |
Nylon |
steel |
||||||
R/mm |
10 |
25 |
25 |
50 |
50 |
50 |
||
D/mm |
18.5（20） |
35 |
60 |
80 |
100 |
125 |
||
f/mm |
6.2（10） |
7 |
10 |
20 |
20 |
25 |
||
r/mm |
- |
- |
6 |
- |
10 |
17 |
||
l/mm |
Depends |
|||||||
| ||||||||
Fall Height | |||||||||||||||
Energy/J |
0.14 |
0.2 |
(0.3) |
0.35 |
(0.4) |
0.5 |
0.7 |
1 |
2 |
5 |
10 |
20 |
50 |
||
Equivalent mass/kg |
0.25 |
(0.2) |
0.25 |
(0.2) |
0.25 |
(0.2) |
(0.2) |
0.25 |
0.25 |
0 .25 |
0.5 |
1.7 |
5 |
5 |
10 |
Fall height±1%mm |
56 |
(100) |
80 |
(150) |
140 |
(200) |
(250) |
200 |
280 |
400 |
400 |
300 |
200 |
400 |
500 |
Degrees of protection against external mechanical impacts
IK01 |
IK02 |
IK03 |
IK04 |
IK05 |
IK06 |
IK07 |
IK08 |
IK09 |
IK10 |
0.14J |
0.2J |
0.35J |
0.5J |
0.7J |
1J |
2J |
5J |
10J |
20J |
Send Inquiry to This Supplier
You May Also Like
-
IEC 60068-2-75 IK07-IK10 Vertical Impact Hammer Testing MachineUS$ 2000 - 6000MOQ: 1 Piece
-
IEC 60068-2-75 IK08 5J Spring Impact HammerUS$ 200 - 5000MOQ: 1 Piece
-
IEC 60598-1 and IEC 60950-1 Impact Test Device With a Steel BallUS$ 2000 - 6000MOQ: 1 Set
-
IEC 60068-2-75 Spring Hammer Calibration DeviceUS$ 2000 - 5000MOQ: 1 Set
-
IEC 60068-2-75 Annex B.3 Figure B.5 Spring Hammer Calibration Device CalibratorUS$ 3000 - 10000MOQ: 1 Set
-
IEC60598-1 Diameter of 50mm Steel Impact BallUS$ 80 - 200MOQ: 1 Piece
-
IEC 60529 IPX1 IPX2 IPX3 IPX4 Comprehensive IP Waterproof Test Chamber for House-hold ApplianceUS$ 5000 - 15000MOQ: 1 Set
-
IEC 62262 IK01 to IK10 Pendulum and Vertical Impact Test ApparatusUS$ 3000 - 8000MOQ: 1 Set
-
IEC 60695-10-2 Ball Pressure Test Apparatus for Heating Resistance TestingUS$ 100 - 500MOQ: 1 Piece
-
IEC 60529 IP5X and IP6X Sand and Dust Test Chamber for Testing Led Lamps and Street LightsUS$ 5000 - 10000MOQ: 1 Set
