IEC60529 Oscillating Tube Test Chamber for IPX3 and IPX4 Testing

IPX3-4 Oscillating TubeTest Chamber

1.Introduction:

IPX3-4 oscillating tube test chamber is designed according to IEC60529 clause 14.2.3 and 14.2.4. It is applied to simulate the electronics, luminaire, electric components and auto parts under the conditions of spraying water and splashing water, and then to check if they can meet the requirements. 

2. Features:

● For IPX3 and IPX4 testing

● The inner wall of the equipment and turntable are made by SUS304# stainless steel, to ensure rustless.

● The water supply pipeline is equipped with a filter, which can filter the impurities in the water and prevent the nozzle from being blocked.

● The water tank is built-in the equipment, the water can be recycled. Auto to control the water level with the help of Water floating ball valve, and alarm at high or low level to protect from the damage caused by low water level.

● Oscillating tube drive: Adopts Chinese branded step motor, with features of low noise and high accuracy. The speed and rotate angle of oscillating tube are precision adjustable.

● Turntable drive: adopts Chinese branded step motor, can adjust the speed and angle by touch screen, and auto control the directions (fit for the samples to do live test).

● The sample power socket (AC220, 10A) is installed on the wall, and the power on and off time of the sample power can be controlled by the program: power off (0-999min)-power on (0-999min)-power off (0-999min), it is applied to do live test.

● Time setting for power: power off: 0-999min-power on: 0-999min-power off: 0-999min

● Control components: 7 inch touch screen+ Panasonic PLC. 

3. Specification