Contact Platform Support
Help CenterAutomatic Borderline Pumping Temperature of Engine Oil Tester
Related Products
-
Rust-Preventing Characteristics Tester ASTM D665NegotiableMOQ: 1 Set -
Low Temperature Brookfield Viscosity Tester ASTM D2983NegotiableMOQ: 1 Set
-
Refrigerator Oil Floc Point TesterNegotiableMOQ: 1 Set
-
Foaming Characteristics of Lubricating Oils Tester ASTM D892NegotiableMOQ: 1 Set
-
Lubricating Oil Ageing Characteristics Tester DIN51352NegotiableMOQ: 1 Set
This instrument is used to measure the boundary pumping temperature, (low temperature) yield stress and apparent viscosity of motor vehicle engine oil. The test temperature control range is wide from 80 to -40℃. The test process is all controlled automatically by computer.
Technical Parameter
1. Applicable standards: ASTM D3829, ASTM D4684
2. Refrigeration method: compressor refrigeration
3. Working temperature: 80～-40℃
4. Temperature control accuracy: ±0.02℃
5. Temperature control method: program temperature control
6. Heating method: electric heating tube heating
7. Detection method: photocell detection
8. Control method: computer automatic control
9. Work unit: 5 units
10. Power of the whole machine: 1200KW
11. Net weight: 20KG
12. Size: 470*320*420mm
1. Temperature range: temperature range 80 to -40℃, temperature control accuracy ±0.02°C;
2. Multi-point temperature correction, high temperature measurement accuracy
3. Semiconductor refrigeration, fast cooling speed and high temperature control accuracy
4. The temperature, cycle and rotor movement are monitored by computer;
5. With delayed start function, it is convenient for users to flexibly control the test process
6. Improved pulley assembly, enhanced pulley stability and sensitivity, photoelectric sensor test;
7. 5 rotors can be detected at the same time, diversity;
8. The rotor has a transparent plexiglass cover for thermal insulation;
9. Microcomputer control, Windows operating system, full English interface;
10. The program automatically controls temperature by nonlinear curve, and measures yield stress and apparent viscosity;
11. The temperature control curve can be edited and drawn in real time according to user requirements;
12. Cleaning temperature control and temperature calibration function;
13. Viscometer constant calibration and storage;
14. The test results can be stored and printed;
15. Calculation and printing function of boundary pumping temperature of "air resistance type" and "flow restricted type";
16. It has the corresponding yield stress, apparent viscosity, and the indicator light for starting the test;
17. Equipped with a developed defrosting system.
Send Inquiry to This Supplier
You May Also Like
-
Portable Oil Particle Counter ISO11171NegotiableMOQ: 1 Set
-
Lubricating Grease Flow Pressure TesterNegotiableMOQ: 1 Set
-
Foaming Characteristics of Lubricating Oils Tester (Air Bath) ASTM D892NegotiableMOQ: 1 Set
-
Automatic Lubricating Oil Evaporation Loss Tester ASTM D5800NegotiableMOQ: 1 Set
-
Evaporation of Rust Preventive Oils Tester JIS K2246NegotiableMOQ: 1 Set
-
Inhibited Mineral Oils Sludging and Corrosion Tendencies Tester ASTM D4310NegotiableMOQ: 1 Set
-
Oil Separation From Lubricating Grease During Storage TesterNegotiableMOQ: 1 Set
-
Rusting Grease Oxygen Inhalation TesterNegotiableMOQ: 1 Set
-
Lubricating Grease Water Washout TesterNegotiableMOQ: 1 Set
-
Hydraulic Oil Filterability TesterNegotiableMOQ: 1 Set
