Contact Platform Support
Help CenterLubricating Grease Water Washout Tester
Related Products
-
Hydraulic Oil Filterability TesterNegotiableMOQ: 1 Set -
Petroleum Products Water Soluble Acid and Alkali TesterNegotiableMOQ: 1 Set
-
High Temperature Foaming Characteristics of Lubricating Oils TesterNegotiableMOQ: 1 Set
-
ASTM D217 Cone Penetration of Lubricating Grease TesterNegotiableMOQ: 1 Set
-
Dropping Point of Lubricating Grease Over Wide Temperature Range TesterNegotiableMOQ: 1 Set
Introduction
This instrument is used to determine the water-splash resistance of grease. Under the specified laboratory conditions, when tested at 38°C or 79°C, the characteristics of the grease's resistance to being washed out of the bearing by water are evaluated.
Product Parameter
1. Applicable standard: ASTM D1264 SH/T0109
2. Temperature control accuracy: ±0.1℃
3. Temperature control range: room temperature～100℃
4. Normal working temperature: 37.8℃±0.1℃ and 79℃±0.1℃
5. Working speed: 600rpm±30rpm
6. Capillary flow: 5ml/s±0.5ml/s
7. Working power supply: AC220V/50HZ
8. Power of the whole machine: 600W
9. Instrument size: 500*360*550mm
10. Net weight: 35KG
Main Feature
1. One-piece structure, the instrument shell is made of refined steel plate and glazed, durable
2. The test bearing chamber and housing fully meet the requirements of the standard method
3. Stainless steel water tank with inlet and outlet pipes, aluminum bearing chamber, copper chrome-plated circulating pump, 1/4 HP motor
4. Stainless steel heater
5. The thermostat of the instrument is an intelligent regulator that integrates temperature control and display, and is equipped with a microprocessor for PID adjustment.
6. The unique design can not start the test shaft, but start the water pump circulation system alone
7. Fixed speed motor, no need to adjust the speed, the speed is 600rpm;
8. Accurately control the test temperature of 38°C and 79°C in accordance with ASTM standards;
9. The improved connecting shaft can quickly and easily disassemble and assemble the test bearing and the inner and outer baffles;
Send Inquiry to This Supplier
You May Also Like
-
Cleveland Open Cup Method Open Flash and Fire Points TesterNegotiableMOQ: 1 Set
-
ASTM D92 Automatic Open Flash and Fire Points TesterNegotiableMOQ: 1 Set
-
Dropping Point of Lubricating Grease Tester ISO2176 ASTM D566NegotiableMOQ: 1 Set
-
Low Temperature Dynamic Viscosity TesterNegotiableMOQ: 1 Set
-
Petroleum Oil and Synthetic Fluids Water Separability TesterNegotiableMOQ: 1 Set
-
Automatic Borderline Pumping Temperature of Engine Oil TesterNegotiableMOQ: 1 Set
-
Rust-Preventing Characteristics Tester ASTM D665NegotiableMOQ: 1 Set
-
Low Temperature Brookfield Viscosity Tester ASTM D2983NegotiableMOQ: 1 Set
-
Refrigerator Oil Floc Point TesterNegotiableMOQ: 1 Set
-
Foaming Characteristics of Lubricating Oils Tester ASTM D892NegotiableMOQ: 1 Set
