Contact Platform Support
Help CenterHengyang Heavy Industry SBD425-C Disc Hydraulic Brake Open Limit Switch
Related Products
-
SBD80-B Hengyang Heavy Industry Disc Hydraulic Brake Interlock ProtectionCNY 1500 - 2900MOQ: 5 Units -
Hengyang Heavy Industry SBD160-B Disc Hydraulic Brake Friction Pad SwitchCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD100-A Disc Hydraulic Brake With Fault DisplayCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD125-A High Performance Friction Pad for Disc Hydraulic BrakeCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD160-A Disc Hydraulic Brake High Wear-resistant Brake PadsCNY 1500 - 2900MOQ: 5 Units
Conditions of use
Ambient temperature:-25℃-+40℃.
Use altitude does not exceed 2000m.
There shall be no flammable, explosive and sufficiently corrosive metal, insulation-destroying gases and conductive dust around the brake.3.5 Outdoor rain and snow erosion or corrosive gases and media should be used corrosion-resistant type products.
Pneumatic disc brake adopts brake body for cavity type, pneumatic disc brake around the drum joint gap, usually four weeks above at the same time with by sealant sealing. Such as the use of five-hole brake, can be inserted into the sealing plate after contact with the plate, brake loaded with rosin braking turbine, metal and other materials for sealing. It can be seen that the pneumatic disc brake has other working principles, such as the turbine principle, the metal principle, the brake valve principle and so on.
The pneumatic caliper disc brake effectively controls the cylinder piston to rotate back and forth, improves the combustion resistance of the cylinder, and produces good braking ability.
It consists of DC coil, control coil and transmission parts, and its working principle and function are the same as that of electric vehicles. Normally open pneumatic disc brake is divided into two kinds of batteries and radiators. The driving parts on this kind of electric car is the whole battery, the energy of the battery is used for gravity brake, and the contact is controlled by the wire rope, and the driving parts are connected with the motor control coil through screws. Normally open electric disc brake has the characteristics of fast starting, sensitive acceleration, safe and reliable, easy to operate and so on.
Send Inquiry to This Supplier
You May Also Like
-
Hengyang Heavy Industry SBD200-A Disc Hydraulic Brake Reasonable Sealing StructureCNY 1500 - 2900MOQ: 5 Units
-
Hengyang Heavy Industry SBD250-A Disc Hydraulic Brake With Flexible Mounting PositionCNY 1500 - 2900MOQ: 5 Units
-
Hydraulic Safety Emergency Brake SBD120-Hengyang Heavy Industry Original Manufacturer Large Spot SalesCNY 1500 - 2900MOQ: 5 Units
-
Hydraulic Safety Emergency Brake SBD240-D Hengyang Heavy Industry Easy MaintenanceCNY 1500 - 2900MOQ: 5 Units
-
Hydraulic Safety Emergency Brake SBD50-D Hengyang Heavy Industry Belt ConveyorCNY 1500 - 2900MOQ: 5 Units
-
Hydraulic Safety Emergency Brake SBD80-D Hengyang Heavy Industry Interlocking SwitchCNY 1500 - 2900MOQ: 5 Units
-
Hydraulic Safety Emergency Brake SBD100-D Hengyang Heavy Industry Liner Wear SwitchCNY 1500 - 2900MOQ: 5 Units
-
Hydraulic Safety Emergency Brake SBD250-C Hengyang Heavy Industry Short Time on BrakeCNY 1500 - 2900MOQ: 5 Units
-
Hydraulic Safety Emergency Brake SBD365-C Casting Crane Hengyang Heavy IndustryCNY 1500 - 2900MOQ: 5 Units
-
SBD425-CHydraulic Safety Emergency Hengyang Heavy Industry Normally Closed BrakeCNY 1500 - 2900MOQ: 5 Units
