Module Spare Parts DS200SDCCG1AGD DS215SDCCG1AZZ01B
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
DS200SDCCG1AGD DS215SDCCG1AZZ01B
The A4 Fast Ethernet switches are store and forward stackable switches that can be adapted and scaled to help meet your network requirements. These stackable switches provide a management platform and an uplink to a network backbone for a stacked group of up to eight A4 switches. You can also use a redundant power supply with these switches to help prevent downtime due to an internal power supply failure in the switch or AC power source. You can install the stackable switch on a flat surface or into a standard 19‐inch rack, and configure the stackable switch functions using the WebView™ application, CLI switching commands, and/ or SNMP. The A4 stackable switch can connect to Ethernet networks or workstations through RJ45 connectors, SFP ports, or Gigabit Ethernet ports, depending on your model’s configuration. The SFP ports support optional pluggable transceivers, which are hot swappable. The 1000Base‐T built‐in RJ45 stacking ports on the A4 switches can be configured as standard 10/100/1000Base‐T switch ports when the unit is in standalone mode (not stacked). For pluggable transceiver compatibility and specifications, refer to the datasheet at /products/transceivers‐ds.pdf. Table 1‐1 lists the number of ports and port types for the A4 switches. For information about... Refer to page... Overview 1-1 Features 1-3 Table 1-1 A4 Switch Port Types A4 Model Ports A4H124-24FX (see Figure 1-1 on page 1-2) • 24 100Base-FX MT-RJ ports • Two 10/100/1000Base-T RJ45 ports which can be used as stacking ports or as Ethernet uplink ports (labeled 25 and 26) • Two Gigabit Ethernet SFP ports (labeled 27 and 28) Overview 1-2 Introduction Figure 1-1 A4H124-24FX Front Panel Figure 1-2 A4H254-8F8T Front Panel Figure 1‐3 shows the back panel of the A4 switches. Figure 1-3 A4 Switch Back Panel A4H254-8F8T (see Figure 1-2 on page 1-2) • Eight 10/100Base-T ports (labeled odd numbers 1 – 15) • Eight 100Base-FX MT-RJ ports (labeled even numbers 2 – 16) • Two 10/100/1000Base-T RJ45 ports which can be used as stacking ports or as Ethernet uplink ports (labeled 17 and 18) • Two Gigabit Ethernet SFP ports (labeled 19 and 20) Notes: Each SFP port supports the installation of 1000
Send Inquiry to This Supplier
You May Also Like
-
Module Spare Parts DS200TCEAG1BNE DS215TCEAG1BZZ01AUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts DSQC604 3HAC12928-1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts DSQC679 3HAC028357-001US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts DT602 GJR2911200R1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts DT680E GJR2923100R1 DT680B-EUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts FC-TSAI-1620MUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts FI820F 3BDH000031R1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts FI830F 3BDH000032R1US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts FLN3524AUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts FLN4234AUS$ 1 - 100000MOQ: 1 Piece