PFEA111-20 3BSE050090R20 ABB Spare Parts for Tension Controller Amplifier
PFEA111-20 3BSE050090R20 ABB Spare parts for tension controller amplifier
PFEA111-20 3BSE050090R20 ABB Spare parts for tension controller amplifier
Our Email: 2235954483@qq.com
contact number:13313705507
contacts:HE
* Phase-to-phase voltage U12 measured at a time of trip as a multiple of the
rated voltage, Un. The same applies to phase-to-phase voltages U23 and
U31. * Residual voltage U0 measured at a time of trip as a percentage of the rated
voltage Un. * Maximum voltage value of the phase-to-phase voltages during the last fault
conditions in the network, measured as a multiple of the rated voltage Un
* Minimum voltage value of the phase-to-phase voltages during the last fault
conditions in the network, measured as a multiple of the rated voltage Un. * Maximum voltage value of the negative phase-sequence voltage during the
last fault conditions in the network, measured as a multiple of the rated
voltage Un. If stage U>> is not based on negative phase-sequence voltage
U2s, dashes are shown on the LCD and "999" when read via serial
communication.
* Minimum voltage value of the positive phase-sequence voltage during the
last fault conditions in the network, measured as a multiple of the rated
voltage Un. If stage U
U1s, dashes are shown on the LCD and "999" when read via serial
communication.
* Maximum voltage value of the residual voltage U0 during the last fault
conditions in the network, measured as a percentage of the rated voltage Un. * Duration of the last start of stages U>, U>>/U2>, U, U0>>
and of the external trip, shown as a percentage of the set operate time, or of
the calculated operate time at IDMT characteristic. A value other than zero
indicates that the corresponding stage has started whereas a value which is
100% of the set or calculated operate time indicates that the operate time of
the stage has elapsed, that is, the stage has tripped. If the operate time of a
stage has elapsed but the stage is blocked, the value is 99% of the set or
calculated operate time.
* Time stamp for the event. The time when the collected data was stored. The
time stamp is displayed in two registers, one including the date expressed as
yy-mm-dd, and the other including the time expressed as HH.MM;SS.sss.
Send Inquiry to This Supplier
You May Also Like
-
PFRA101 3BSE003911R230 ABB New Original Tension ControllerUS$ 100 - 200MOQ: 100 Pounds
-
PFSA140 3BSE006503R1 Power Module: ABB Brand New Original, Imported From Europe and AmericaUS$ 100 - 200MOQ: 100 Pounds
-
PFSK130 3BSE002616R1 ABB Module Channel Control BoardUS$ 100 - 260MOQ: 100 Pounds
-
PFSK152 3BSE018877R1 ABB Module Card Motor in StockUS$ 100 - 260MOQ: 100 Pounds
-
PFSK160A 3BSE009514R1 ABB Online Hot Sale of Robot System Spare PartsUS$ 113 - 166MOQ: 100 Pounds
-
PFSK162 3BSE015088R1 ABB Functional Module Spare PartsUS$ 100 - 260MOQ: 100 Pounds
-
PFSK164 3BSE021180R1 ABB DSP Signal Processing ModuleUS$ 113 - 600MOQ: 100 Pounds
-
PFTL101A 2.0KN PFTL101B 2.0KN ABB Spare Parts for Tension Sensor AmplifierUS$ 100 - 200MOQ: 100 Pounds
-
PFTL101B-5.0KN/20KN 3BSE004203R1 ABB Supply of Spare Parts for Tension Controller SystemUS$ 190 - 200MOQ: 100 Pounds
-
PFTL201C 10KN/20KN/50KN ABB Tension Controller HeadUS$ 10 - 166MOQ: 100 Pounds




