Contact Platform Support
Help CenterMedical Needle Tube Toughness Tester Specially Used to Test the Toughness of Medical Needle Tubes.
Related Products
-
Medical Injection Needle (tube) Rigidity Tester for Disposable SyringeNegotiableMOQ: 1 -
Medical Needle Pricking Force Tester for Disposable Sterile Hypodermic NeedleNegotiableMOQ: 1
-
Plastic Syringe Filling and Closing MachineNegotiableMOQ: 1
-
Mold for PP Syringe Barrel and Plunger and TPE GasketNegotiableMOQ: 1
-
TPE Syringe Gasket Stopper Stainless Steel MoldNegotiableMOQ: 1
Medical Needle Tube Toughness Tester
The medical needle tube toughness tester is designed and manufactured according to the relevant provisions of GB18457-2015 (EQVISO 9626-1991) "Manufacturing stainless steel for Medical Use".Specially used to test the toughness of medical needle tubes.
The medical needle toughness tester is composed of intelligent controller, positioning mechanism, swing mechanism, fixture and so on.The intelligent controller consists of CPU, motherboard, LCD display, power supply and other parts.
The whole tester has a high degree of automation. After the tested object is installed, the user can automatically complete all the operations by just pressing the unique operation key.
Environment:
| Working Temperature: | 5~40℃ |
| Relative Humidity: | 45-80% |
| Power Supply: | 220V ± 22V |
| Frequency : | 50 HZ ± 1HZ |
Display Method:
1.It adopts a four-digit high light LED LCD display
2. It uses a three-position switch to set the bending angle of the tested object.
3.Consumption Power:200VA
4. Testing Frequency:0.5HZ±0.025HZ.
5.Bending Angle:15º,20º,25º,the error should not be greater than ±2º
6.Apply 20 times forces in both directions.
Send Inquiry to This Supplier
You May Also Like
-
Automatic 1000 mm Stretch Wrapping Film Making Machine for LLDPE PEUS$ 10020.00MOQ: 1 Set
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Mono Layer Extrusion Air Bubble Film Extrusion LineryUS$ 20,000 - 60,000MOQ: 1 Set
-
LIANJI Plastic Extrusion Blow Molding MachineUS$ 99 - 199MOQ: 1 Set
-
PP/HDPE Flat Yarn Making Machines for Woven Bag/Cement Bag/Container Bag PlantsUS$ 8,500 - 8,500MOQ: 1 Set
-
Chinese Waste Plastic Board Recycling MachineUS$ 40,000 - 48,000MOQ: 1 Set
-
The Waste Tire Recycling Production Line With CE ISO SGSUS$ 20,000 - 80,000MOQ: 1 Set
