Digital push pull force calibration dynamometer

Purpose

The digital force gauge with compact size, high accuracy, they are easy to operate and handy to carry out. Widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for testing of pull or push load test, insertion force or pull and destructive experiment. This digital force gauge is new generation pulls the pressure measuring instrument.

Feature and Description

1.High precision and high resolution.

2.Five testing modes and three display methods for selection(enhance testing efficiency to the maximum extent).

3.N(Newton),Kg (Kilogram) and Lb (Pound) three measuring units for selection and conversion.

4.Setting function of gravity acceleration----User can input at your option the accurate value of gravity acceleration at the using place so as to make the testing and unit conversion be more accurate.

5.Function of peak value maintaining. Maintain the display of peak value until manual zero clearing.

6.Automatic PEAK function:can set up automatic PEAK time,from 1-9999 seconds.

7.Max. and min. and comparison value can be set for statistic analysis. The buzzer will alarm if exceeding comparison value.

8.Data storage function. 447 testing values can be stored.

9.Data output function. The data can be input into computer through data line for various analyses.

10.Environmental protection. The device will automatically stop if no operation within 10 minutes.If the automatic shutdown is set to 0,the instrument will not shut down.

11.High quality chargeable power supply. The charging voltage is available from 100V to 240V, which can accommodate most areas in domestic and at abroad. It has also protection functions for short circuit, leakage and overload.

12.Special testing function of make-break ability of switch contact to make the make-break testing be more accurate.

13.6 digits large screen display.

14.Low battery detection shutdown,when the battery is running low,the instrument will automatically put-off,it can prevent the low battery caused by Inaccurate measurement.

Picture for Our product

Force Meter	Controller
Accessories	Packing
Rs232 interface	S type Sensor

Technical data

1.Company Show

2.Factory Show

1.Certification

2.Warranty and After-sale service

♥♥We Supply 1 Year Warranty , And Lifelong Free Technical Guiding And Training.♥♥

We do not just sell equipment,we pay more attention to provide users with

high quality service!Thanks.