Contact Platform Support
Help CenterPre-reforming Catalyst for Light Hydrocarbons
Related Products
-
Low Temperature Shift Catalyst for Hydrogen PlantNegotiableMOQ: 1000 Kilograms -
CO High(Medium) Temperature Shift Catalyst for Chemical Fertilizer PlantNegotiableMOQ: 1000 Kilograms
-
Secondary Steam Reforming Catalysts for Producing HydrogenNegotiableMOQ: 1000 Kilograms
-
Ammonia Synthesis Catalysts for Ammonia Plant and Fertilizer FactoryNegotiableMOQ: 1000 Kilograms
-
Hydrogenation Catalyst for Purifying H2 Production FeedstockNegotiableMOQ: 1000 Kilograms
Pre-reforming Catalyst for Light Hydrocarbons
Application
1. Applied to pre- reforming process of higher hydrocarbons and steam reforming process of partial hydrocarbons to generate methane- rich gas.
2. Suitable to a wide range of hydrocarbon feedstock, such as naphtha, LPG, light hydrocarbons, refinery off- gas, natural gas etc., which can be used alone or in combination.
3. Suitable for fixed bed pre- reformer.
4. SYAMCAT YZ119R pre-conversion catalyst is a high nickel system catalyst with nickel loading on a porous carrier with excellent low temperature adiabatic pre-conversion activity of hydrocarbon vapours. It is suitable for the reaction process of producing methane-rich gas from light oil, liquefied gas, refinery gas and natural gas.
Physico - chemical properties
Item |
SYAMCAT YZ119 |
SYAMCAT YZ119R |
Color and shape |
Black cylinder |
Black cylinder |
Size/mm |
Φ5*5 |
Φ4.8~5.2*4~5.5 |
Active component |
Ni |
Ni |
Bulk density/(kg.L-1) |
0.95-1.10 |
0.95~1.10 |
Side crush strength/(N.cm-1) |
≥100 |
≥150 |
Outgoing catalyst state |
Oxidized or reduced |
Reduced |
Features
1. High content of nickel stably dispersed on porous carrier, resulting in good low temperature activity an activity stability, ensures effective conversion.
2. Both oxidized and reduced catalysts can be supplied, the oxidized catalyst needs to be activated in situ, while the reduced one can be used directly.
3. Reduction gas is needed to project the pre- reforming catalysts during start up and shut down.
4. Introduction of hydrocarbon feedstock alone or in combination, switching or dosage adjustment of feeds does not affect the normal use of the catalyst, increasing the capacity of the unit.
5. Excellent resistance to operating fluctuation and good operating flexibility. Cold feed can be introduced into reactor directly, reducing energy consumption.
6. Patented product and awarded the National Prize for Science and Technology Progress.
Send Inquiry to This Supplier
You May Also Like
-
Primary Steam Reforming Catalyst for Hydrogen Production PlantNegotiableMOQ: 1000 Kilograms
-
Secondary Steam Reforming Catalysts for Ammonia Synthesis GasNegotiableMOQ: 1000 Kilograms
-
Primary Steam Reforming Catalyst for Natural GasNegotiableMOQ: 1000 Kilograms
-
ZnO Desulfurization CatalystNegotiableMOQ: 1 Ton
-
Methanation Catalyst for Hydrogen Production PlantNegotiableMOQ: 1000 Kilograms
-
Pre-reforming Catalyst for Light HydrocarbonsNegotiableMOQ: 1000 Kilograms
-
DIN 1.4864 High-Ni Austenitic Strip 1.0mm×85mm 2B Finish Mill Edge Reforming Catalyst BasketUS$ 1.25 - 4.15MOQ: 100 Kilograms
-
For Porsche Cayenne Pre-Catalyst Oxygen Sensor 94860612802US$ 1 - 100MOQ: 1 Unit
-
V2O5 Oxidation CatalystUS$ 2.75 - 2.8MOQ: 1000 Liters
-
Nickel Nitrate Nickel CatalystUS$ 2,000 - 3,500MOQ: 1 Metric Ton
