Contact Platform Support
Help CenterTMW Cast Iron Electrodes Niquel100, Ni99 Ni55 ENi-CI, ENiFe-CI
Related Products
-
TMW Mild Steel Solid Mig CO2 Welding Wires ER70S-6 ER50-6 G3Si1 SG2 G4Si1US$ 1200 - 2500MOQ: 5 Metric Tons -
TMW Low Alloy Steel Solid Mig CO2 Welding Wires ER70S-2 ER70S-3 ER70S-4 ER80S-D2US$ 1200 - 2500MOQ: 5 Metric Tons
-
TMW Low Alloy Steel TIG Rods ER70S-6 ER70S-2, ER70S-3 ER80S-D2US$ 2000 - 5000MOQ: 5 Metric Tons
-
TMW Mild Steel Gas Shield Flux Cored Wires E71T-1C/M H4US$ 1200 - 1600MOQ: 5 Metric Tons
-
TMW High Tensile Low Alloy Steel Gas Shield Flux Cored Wires E81T1-Ni1C/M H4 E81T1-Ni2C/M H4US$ 3000 - 5000MOQ: 5 Metric Tons
ENi-CI
AWS A5.15 ENi-CI
GB/T10044 EZNi-1
Description：
A pure nickle electrode designed to weld normal grades cast irons. The weld metal is soft and easily machinable, deposition is performed on cold or slightly preheated material. It is suitable for joining cast irons for the rectification of casting and repairing of broken parts. Used to weld thin parts of cast irons and repair broken parts.
Diameters:
2.5mm, 3.2mm, 4.0mm, 5.0mm.
Typical Chemical Compositon:
C |
Mn |
Si |
S |
Fe |
Ni |
others |
≤2.0 |
≤1.0 |
≤2.5 |
≤0.03 |
≤8.0 |
≥90 |
≤1.0 |
Welding Current:(AC/DC+)
Diameter(mm) |
2.5 |
3.2 |
4.0 |
5.0 |
|
Current/A |
-- |
95-120 |
150-180 |
190-220 |
|
Note:
1.The electrodes must be baked 1 hours in 150℃ before using.
2.Hammer the bead can relieve strength of weld parts to avoid crack..
ENiFe-CI
AWS A5.15 ENiFe-CI
GB/T10044 EZNiFe-1
Description：
A nickel-iron type electrode designed to weld normal grades cast irons and joint them to steel. It has very good current-carrying capacity and the weld metal is stronger and more resistant to solidification cracking than other nickel type electrodes . Used for the repairing of high strength gray cast iron and nodular cast irons.
Welding Position:
Diameters:
2.5mm, 3.2mm, 4.0mm, 5.0mm.
Typical Chemical Compositon:
C |
Mn |
Si |
S |
Cu |
Ni |
Fe |
1.17 |
1.2 |
0.80 |
0.003 |
0.01 |
Bal |
54 |
Welding Current:(AC/DC+)
Diameter(mm) |
2.5 |
3.2 |
4.0 |
5.0 |
|
Current/A |
-- |
95-120 |
150-180 |
190-220 |
|
Note:
The electrodes must be baked 1 hours in 150℃ before using.
Send Inquiry to This Supplier
You May Also Like
-
TMW Metal Core Flux Cored Wires E70C-6M H4US$ 2000 - 3000MOQ: 5 Metric Tons
-
TMW Gasless Self Shield Flux Cored Wires E71T-GS E71T-11US$ 3000 - 5000MOQ: 5 Metric Tons
-
TMW Stainless Steel Tig Welding Rods ER308L ER308L ER316L ER2209US$ 2000 - 5000MOQ: 5 Metric Tons
-
TMW Carbon Steel Submerged Arc SAW Welding Wires EL8 EL12 EH14 EM12KUS$ 1000 - 1500MOQ: 5 Metric Tons
-
TMW General Purpose Rutile Type Welding Electrodes E6013US$ 1000 - 1500MOQ: 5 Metric Tons
-
TMW Low Hydrogen Iron Powder Basic Electrodes E7018US$ 1200 - 1500MOQ: 5 Metric Tons
-
TMW Extra Low Temperature Low Hydrogen Iron Powder Basic Electrodes E7018-1 H4US$ 1200 - 1500MOQ: 5 Metric Tons
-
TMW Cellulose Pipe Welding Electrodes E6010 E6011 E7010US$ 1300 - 1600MOQ: 5 Metric Tons
-
TMW Stainless Steel Electrodes E308L-16 E309L-16 E316L-16US$ 5000 - 7000MOQ: 5 Metric Tons
-
201 Uns N02201 2.4068 LC-Ni99 Inconel601 Nickel-based Alloy Plate/Sheet for ReprocessingUS$ 10000 - 40000MOQ: 1 Ton
