Contact Platform Support
Help CenterT3AR50160 Pig Fish Extruder Gearbox Tandem Roller Bearing 50 X160x167mm
Related Products
-
Rubber Industry Parallel Twin-screw Extruder T4AR527 Bearing in Stock 5x27x52mmUS$ 200 - 1000MOQ: 4 Pieces -
Deep Drilling Oil Rig Tandem Roller Bearing T4AR527E 5x27x52mm in StockUS$ 200 - 1000MOQ: 4 Pieces
-
Pipelay Pulling Machine Use Thrust Roller Bearing T4AR537 Price 5x37x78mmUS$ 200 - 1000MOQ: 4 Pieces
-
Screw Press Oil Extraction Machine Use Roller Bearing T4AR645E 6x45x92mmUS$ 200 - 1000MOQ: 4 Pieces
-
Twin Screw Extruder Gearbox BearingT4AR1037 10x37x79mm in StockUS$ 200 - 1000MOQ: 4 Pieces
T3AR50160 pig fish extruder gearbox tandem bearing 50 x160x167mm
Tandem bearings T3AR50160 consist of several axial cylindrical roller bearings arranged in line, A system of rings and washers matched to each other ensures that all stages of the tandem bearing are subjected to uniform load at all times irrespective of the ratio C/F. The rings and washers are made from hardened steel. Tandem bearings are predominantly fitted with standard axial cylindrical roller and bearing assemblies. The thrust cylindrical roller bearingT3AR50160 with size 50 x160x167mm, the inner diameter:50 mm, the outer diameter:160mm, the total height:167mm
Tandem bearing old code |
Basic size unit(mm) |
Basic load rating Unit (KN) |
material |
|||
Inner dia |
Outer dia |
Height |
Cr |
Cor |
||
T3AR50160 |
50 |
160 |
167 |
820 |
3950 |
Steel chrome |
When using tandem bearings, the following recommendations should be adhered to:
1. Preload: 1% of the dynamic basic load rating. The dynamic basic load rating of each tandem bearing . Figures not listed will be provided by out institute on request.
2. Radial guidance: full complement cylindrical roller bearings or needle roller bearings can be used.
3. Eliminate tilting: the supporting parts must be machined to eliminate any tilting.
4. Mounting tolerances: recommended the following mounting tolerances: shaft f6 and housing bore F7.
5. Lubrication: tandem bearings must always be lubricated by oil circulation.
6. if you have the technology problem, Please contact us, we can offer the solve the solution for you.
Send Inquiry to This Supplier
You May Also Like
-
Tandem Thrust Roller Bearings for Twin Screw Extruder T4AR1037A 10x37x79mm in StockUS$ 200 - 1000MOQ: 4 Pieces
-
T4AR1134 Tandem Roller Bearing for Parallel Twin Screw Extruder in Rubber MachineUS$ 200 - 1000MOQ: 4 Pieces
-
Parallel Twin Screw Extruder in Plastic Industry T4AR1242 12x42x83.5mm in StockUS$ 200 - 1000MOQ: 4 Pieces
-
T4AR1860 Bearing for Screw Press in Oil Processing Industry 18x60x101mm Four Rows RollerUS$ 200 - 1000MOQ: 4 Pieces
-
T4AR1858 Thrust Roller Bearing for Deep Hole Drilling Rig for Well Drilling Machine 18x58x101mmUS$ 200 - 1000MOQ: 4 Pieces
-
Pipe Laying and Drawing Machine Use Tandem Roller Bearing T4AR1949E 19x49x88.5mmUS$ 200 - 1000MOQ: 4 Pieces
-
Food Extruder Multi-stage Tandem BearingsT4AR2060 Price and Stock 20x60x101mmUS$ 200 - 1000MOQ: 4 Pieces
-
Tandem Thrust Roller Bearings 2 Stages TAB-017043-201 1.75*4.3765*3.875inch SizeUS$ 200 - 1000MOQ: 4 Pieces
-
Tandem Thrust Roller Bearings 2 Stages TAB-027047-203 Inch Size 2.757*4.7035*2.625US$ 200 - 1000MOQ: 4 Pieces
-
Extruder Gear Drives Use Thrust Roller Bearings TAB-030066-201 Inch Size 3*6.6265*3.625US$ 200 - 1000MOQ: 4 Pieces
