Tandem Thrust roller Bearings 2 stages TAB-027047-203 inch size 2.757*4.7035*2.625

 Tandem Thrust roller Bearings 2 stages TAB-027047-203 inch size 2.757*4.7035*2.625

The bearing consists of a series of thrust plates and roller assemblies with compression sleeves separating the stages. The component design  and overall match grinding make this bearing unique. The design of the sleeves, along with the precision match grinding of the components, allows the load to be equally applied through the stages of the bearing.

Tandem thrust bearings TAB-027047-203   are designed to be used in horizontal shaft applications (extruder gear drives) and it is essential that a sufficient thrust load be applied to prevent roller slip. Typically, the minimum load required is expressed as a ratio of the bearing’s dynamic load rating (C)to the applied load (P). Loads representing C/P > 12 must be avoided and  loads where C/P falls between 8 and 12 should be avoided. TAB-027047-203   is two stages thrust roller bearing with inner dia:2.757 inch size,outer dia diameter:4.3765 inch size, the height:2.625inch size