Contact Platform Support
Help CenterThree-phase Standard Power Source
Related Products
-
Portable Three-phase Standard MeterNegotiableMOQ: 1 Piece -
Three-phase Electric Energy Meter CalibratorNegotiableMOQ: 1 Piece
-
Three Phase Energy Meter Field CalibratorNegotiableMOQ: 1 Piece
-
Single-phase Electric Meter Field CalibratorNegotiableMOQ: 1 Piece
-
Portable Single-phase Electric Meter Test EquipmentNegotiableMOQ: 1 Piece
Product description：
The portable Three-phase standard power source is suitable for metering departments, power distribution terminals, power management, reactive power compensation devices and enterprise production.
Technical index：
Electrical parameters | |
Accuracy class |
0.05%, 0.1% |
Power supply |
Single phase AC 85-265 V, frequency 50/60 Hz |
AC Voltage output | |
Range (U1, U2, U3 phase) |
57.7V/100V/220V/380V; range switch automatically (Max 500V) |
Electrical parameters - continued | |
Adjust fineness |
0.01% RG |
Accuracy |
0.05% RG |
Stability |
|
Distortion degree |
|
Output power |
25VA |
Full load regulation rate |
0.01% RG |
Full load regulation time |
Less than 1mS |
Long-term stability |
± 60 PPM/year |
AC Current output | |
Range (I1, I2, I3 phase) |
0.2A, 1A, 5A, 20A, 100A; range switch automatically |
Adjustment range |
(0-120)%RG |
Adjust fineness |
0.01% RG |
Accuracy |
0.05% RG |
Stability |
|
Distortion degree |
|
Output power |
45VA |
Full load regulation rate |
0.01% RG |
Full load regulation time |
Less than 1mS |
Long-term stability |
± 60 PPM/year |
Power output | |
Accuracy |
0.05% RG |
Stability |
0.01% RG/120s |
Phase angle | |
Adjusting range |
0°-359.99° |
Resolution |
0.001° |
Accuracy |
0.05° |
Power factor | |
Adjusting range |
-1 ~ 0 ~ +1 |
Resolution |
0.0001 |
Accuracy |
0.0005 |
Frequency | |
Adjusting range |
40-65 Hz |
Resolution |
0.001 Hz |
Accuracy |
0.005 Hz |
Temperature drift |
± 0.5 PPM/°C |
Long-term stability |
± 4 PPM/year |
Electrical parameters - continued | |
Harmonic accuracy |
|
Harmonic phase |
0°-359.99° |
Harmonic phase accuracy |
|
Harmonic set accuracy |
0.1% (relative to the base wave ratings) |
Mechanical parameters | |
Dimensions (W×D×H) (mm) |
500x600x175 |
Weight (kg) |
27 |
Environmental conditions | |
Working temperature |
0°C to 40°C |
Storage condition |
-30°C to -60°C |
Relative humidity |
≤ 85% |
Features：
1.To set up and take the load regulation of voltage, current, phase angle, frequency and power factor etc, can be used as a large current source, voltage source and power source.
2.Seting 2-31 times of the amplitude and phase harmonics, and it can be added to the base wave in every harmonic output.
3.Voltage, current output a wide range, big power, high stability, waveform distortion degree is small.
4.Strong with load ability, but it can take capacitive, sensibility, resistance of composite type load or load and load regulation is higher than 0.01%.
5.Apply the 32 bit MPU + DSP + CPLD, powerful flexible.
6.Using hardware PID, fast response, the change of load will not cause output volatility.
7.Industrial frequency waves as high as 5000 points a week of the wave kneading, signal output without filter, precise output waveform, the harmonic output precision, harmonic distortion degree is small.
8.Range switching automatically.
9.Using software calibration, simple operation, stable and reliable.
10.Vector diagram display, adjustable to IEC387 OR DIN410.
Send Inquiry to This Supplier
You May Also Like
-
Single-phase Standard Power SupplyNegotiableMOQ: 1 Piece
-
Three-phase Phase Volt-ampere MeterNegotiableMOQ: 1 Piece
-
3 Phase Handheld Power Quality AnalyzerNegotiableMOQ: 1 Piece
-
Three-phase Thermal Relay TesterNegotiableMOQ: 1 Piece
-
6 Phase Relay Protection TesterNegotiableMOQ: 1 Piece
-
3 Phase Relay Protection TesterNegotiableMOQ: 1 Piece
-
Three Phases Protection Relay TestNegotiableMOQ: 1 Piece
-
Power Recording AnalyzerNegotiableMOQ: 1 Piece
-
Generator Rotor AC Impedance TesterNegotiableMOQ: 1 Piece
-
3 Phase Capacitance And Inductance TesterNegotiableMOQ: 1 Piece
