Metal Copper Air Conditioner Pipe/ Air conditioning duct Production Line

Metal Copper Air Conditioner Pipe/ Air conditioning duct Production Line

1. Machine line Description  

Copper Tube Continuous casting and rolling process flow chart  

Cathode→Melting & Casting→Rolling→Three Cascade Line→Spinner block       ↓  

 Finished products ← Annealing ← Level Winding& Eddy Detector    ←        ←      ↓

Annealing←Level Winding& Eddy Detector←Inner Grooving←On-line Annealing  ←

2. Main euqipments for Metal Copper Air Conditioner Pipe/ Air conditioning duct Production Line

1.    Three-roll planetary mill ,Model:FXZJ-SG

Product description of three - roll planetary rolling mill

Technics Characteristic

1)     High pressure down rolling mill, single channel extension coefficient can reach more than 16

2)     Rolling deformation is reasonable, after rolling the state was homogeneous recrystallization equiaxed grains

3)     Solar terms effect is perfect

4)     Using horizontal continuous casting hollow tube billet, the outer diameter of the tube can reach φ120mm

5)     High degree of automation and high production efficiency

Technical parameter

Detail photos of Three-roll planetary mill 

2. Whirlwind milling machine

Technics Characteristic

1)    A milling that completes the surface of the circular surface 0.3 ~ 0.5mm at one time feeding.

2)    A milling that completes the surface of the circular surface 0.3 ~ 0.5mm in one feed.

3)    Copper tube billet length in the 2 ~ 15m or even longer can be used

4)    The billet feed can be adjusted at infinity

5)    Three - blade adjustable milling surface

Technical parameter

Processing copper tube billet outer diameter: φ60 ~ φ120mm

Thickness of copper billet pipe: ≥ 8mm

Copper billet tube length: 10~30m

The thickness of the flaying circumference: 0.5±0.2mm

Speed: 0~2m/min

Detail photos of Whirlwind milling machine

3. Crawler-type continuous drawing machine or CAM type combine drawing machine

Technics Characteristic

The FXLS series combined drawing machine is used to reduce the diameter and wall thickness of the mill and pilger mill. The pipe is hardened during drawing. This pull can reduce the pull - pull of the puller. Because of the hardness of the tube drawing, the tube can be drawn at high speed through a disc drawing machine.

Technical parameter 

1)    Maximum drawing force: 1st drawing 100kN, 2nd drawing 80kN, 3rd drawing 60kN.

2)    Maximum drawing speed: 120m/min (3rd drawing)

3)    Feed specifications: (φ43~φ50mm)X(2.0~2.5mm)

4)    Equipment drive system: DC motor, Full digital controllable DC converting controlling system.

5)    Total power: 450Kw

6)    Total weight of equipment: 82 Tons

 Photos of Crawler-type continuous drawing machine

4.Inverted vertical plate drawing machine

FXDL-2200 vertical plate

Technical Parameter
Reel diameter:2200mm
Maximum drawing force:60kN, 80kN, 120kN, 150kN
Drawing speed range:0~1000m/min
Max.inlet spec: φ50X2.5mm
Min outlet spec: φ4X0.33mm
Max.Coil Weight:1200kg
Drawing material: copper
Main motor power:~500kW
Weight:90T

Photos of Inverted vertical plate drawing machine 

5.Online annealing unit

FXHT Copper online annealing unit

Technical Parameter

Total power:880kW~1200kW

Material spec: φ9~φ13mm 

Operating speed:0~600m/min

Photos of Online annealing unit 

6.Copper tube internal thread forming unit

Copper tube internal thread forming unit

Technical Parameter

Drawing method

High speed motor speed:18000RPM~35000RPM

Drawing speed:0~100m/min

internal thread forming speed:0~70m/min

Total power:55kw

Photos of Copper tube internal thread forming unit Ph