Contact Platform Support
Help CenterLabel Sticker Initial Adhesion Tester
Related Products
-
Tape Label Lasting Adhesion TesterUS$ 1000 - 2000MOQ: 1 Set -
Adhesive Label Temperature Control Lasting Adhesive TesterUS$ 1000 - 2000MOQ: 1 Set
-
Adhesive Label Peel Strength TesterUS$ 1000 - 2000MOQ: 1 Set
-
Label Film Soft Package Peel Force TesterUS$ 1000 - 2000MOQ: 1 Set
-
Bottle Wall Thickness Measurement TesterUS$ 1000 - 2000MOQ: 1 Set
Label Sticker Initial Adhesion Tester applies to pressure-sensitive tapes, medical patches, self-adhesive labels, protective films and other products. It uses two methods: inclined rolling ball method and inclined groove rolling ball method.
FeaturesØ With the principle of inclined rolling ball method, instantaneous adhesion of samples can be obtained.
Ø Two Testing Methods: inclined rolling ball method and inclined groove rolling ball method.
Ø The steel balls designed in accordance with the standards ensure the accuracy of data.
Ø Testing inclined angle can be adjusted freely from 0° to 60° according to users’ requirements.
PrincipleA: Inclined Rolling Ball Method.
The initial viscosity is measured with the touch of steel balls and the viscous surface of the sample. The steel ball rolls over the surface of the sample which is laid on a inclined plate. Then, evaluate the tack of the ball with the maximum length of the sticky surface to obtain the measurement.
B:Inclined Groove Rolling Ball.
Roll a steel ball of predetermined size through an inclined groove, then measure the distance rolling on the adhesive surface of the adhesive tape of a horizontal plate, and evaluate the size of the initial tack.
StandardsGB/T 4852, JIS-Z-0237, YY/T 0148, Chinese Pharmacopoeia
ApplicationsBasic Applications |
Adhesive products,e.g, pressure-sensitive tapes, medical patches, adhesive labels and protective films. |
Adjustable inclined angle |
0 ～ 60° |
Length of Table |
120 mm |
Width of Table |
80mm |
QTY. of Steel balls |
29 |
Dimension |
320mm (L) × 140mm (B) × 180mm (H) |
Net Weight |
13 kg |
Instrument, 29 steel balls, Screw Arbor.
Send Inquiry to This Supplier
You May Also Like
-
Manual Bottle Cap Torque TesterUS$ 1000 - 2000MOQ: 1 Set
-
Automated Digital Cap Torque TesterUS$ 1000 - 2000MOQ: 1 Set
-
Glass Bottle Ramp Pressure TesterUS$ 1000 - 2000MOQ: 1 Set
-
Glass Bottle Pendulum Impact Resistance TesterUS$ 1000 - 2000MOQ: 1 Set
-
Glass Bottle Polarizing Stress TesterUS$ 1000 - 2000MOQ: 1 Set
-
Ampoule Bottle Break Force TesterUS$ 1000 - 2000MOQ: 1 Set
-
Glass Bottle Perpendicularity TesterUS$ 1000 - 2000MOQ: 1 Set
-
Ink Printing Layer Rub TesterUS$ 1000 - 2000MOQ: 1 Set
-
Release Paper Coefficient of Friction TesterUS$ 1000 - 2000MOQ: 1 Set
-
Release Paper Peel Strength TesterUS$ 1000 - 2000MOQ: 1 Set
