S30408 production of stainless steel tee professional manufacturers

Stainless steel tee for pipe fittings, pipe fittings. Used in main pipeline to branch pipe. Stainless steel tee is divided into equal diameter and reducing diameter, equal diameter tee's pipe end is the same size; The main pipe size of the reducing tee is the same, while the branch pipe size is smaller than the main pipe size.

Stainless steel tee is a pipe fitting used at the branch of the pipeline. For the use of seamless pipe manufacturing tee, the usual process has hydraulic bulging and hot pressing two kinds. The hydraulic bulging of stainless steel tee is a forming process in which the branch tube is bulged by axial compensation of metal material. The process is to use special hydraulic press, with three links within the tube billet diameter equal injection liquid, through the two horizontal side of the hydraulic cylinder synchronization of the motion of tube billet, billet after squeezed smaller volume, smaller volume of liquid with the tube billet inside the tube billet and the pressure increases, when the stainless steel tee branch pipe bulge out to the pressure, the metal material in the liquid in the cylinder and the pipe pressure under the dual role of flow along the mold cavity and the branch pipe.

The hydraulic bulging process of stainless steel tee can be formed in one time, and the production efficiency is high. The thickness of head and shoulder of stainless steel tee has been increased.