CSMP2 mini size customized air shaft clutch

CSMP2 mini size customized air shaft clutch

CSMP2 mini size customized air shaft clutch is just like our NAC2 friction small industrial clutch. It is made by Handong company with high quality, bore size is 20mm. Although its size is small, it can transmit torque 26N.m. NAC2 is a special size pneumatic clutch, its structure is similar with regular NAC5, NAC10, NAC20, NAC40, NAC60, function is the same. Difference is the outside looks, like this:

NAC industrial air shaft clutch is a kind of friction pads pneumatic clutch, it composed of cylinder, piston, flange plate, friction pad. After passing into air pressure, piston pushed flange plate touches with friction pad, then clutch linked. This NAC2 is a small size friction clutch used for tension control for transmission industry. 

When the flange plate connected with power through chain wheel, gear wheel, V-belt pulley, when the motor working, driving flange plate will be rotated together. But in this time, the driven shaft is not working. If needed to transmit power from driving flange plate to driven shaft, we should input air pressure, making flange plate touches with friction pad, power transmitted to the driven part, so the driven part will be rotating together.

This NAC2 CSMP2 HDC-02 pneumatic clutch can transmit high torque, following is the detail technical data of it for your reference:

Model: NAC-2, NAC-5, NAC-10, NAC-20, NAC-40, NAC-60

Weight: 2.9-50kgs

Bore size: 20-60mm

Dimension: 115*120*20mm 

Torque: 26-590N.M

Air pressure: 0.6Mpa

Volume of air chamber (cm3): 4.359-161.5

Allowable friction plate abrasion Vf (cm3): 15.15-223.5

Rotating speed limit Nc (r/min): 1200-1800rpm